Qtech QSW-8200-28T-AC-DC [29/74] Default information originate

User Manual

Chapter 3. Commands for RIP 29

www.qtech.ru

 Parameter: None.

 Default: Close the debug by default.

 Command Mode: Admin Mode.

 Usage Guide: None.

 Example:

 Switch#debug rip redistribute route receive

 Switch#no debug rip redistribute route receive

3.7 default-information originate

 Command: default-information originate

 no default-information originate

 Function: Allow the network 0.0.0.0 to be redistributed into the RIP. The “no default-

information originate” disables this function.

 Parameter: None

 Default: Disabled

 Command Mode: Router mode and address-family mode

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# default-information originate

3.8 default-metric

 Command: default-metric <value>

 no default-metric

 Function: Set the default metric value of the introduced route. The “no default-metric”

command restores the default value to 1.

 Parameter: <value> is the metric value to be set, ranging between 1~16.

 Default: Default route metric value is 1.

 Command Mode: Router mode and address-family mode

 Usage Guide: default-metric command is used for setting the default route metric value

of the routes from other routing protocols when distributed into the RIP routes. When

using the redistribute commands for introducing routes from other protocols, the

default route metric value specified by default-metric will be adopted if no specific

route metric value is set.

 Example: Set the default route metric value to 3 for introducing routes from other