Qtech QSW-8200-28T-AC-DC [33/74] Ip rip authentication string

User Manual

Chapter 3. Commands for RIP 33

www.qtech.ru

ip rip authentication key or ip rip authentication string. Independently configuration will

not lead to authentication process.

 Example: Switch# config terminal

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)# ip rip authentication mode md5

 Related Command: ip rip authentication key-chain, ip rip authentication string

3.15 ip rip authentication string

 Command: ip rip authentication string <text>

 no ip rip authentication string

 Function: Set the password used in RIP authentication. The “no ip rip authentication

string” cancels the authentication.

 Parameter: <text> is the password used in authentication of which the length should be

1-16 characters with space available. The password should end with enter.

 Command Mode: Interface mode

 Usage Guide: The ip rip authentication key will not be able to be configured when this

command is configured, key id value is required in MD5 authentication which is 1 when

use this command. The mode will be set to plaintext authentication in case no mode

configuration is available. The “no ip rip authentication string” command will cancel

the authentication which only cancels the authentication process when sending or

receiving data packet other than set non authentication mode. Input ip rip

authentication string aaa aaa to set the password as aaa aaa which is 7 characters.

 Example: Switch# config terminal

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)# ip rip authentication string guest

 Related Command: ip rip authentication mode

3.16 ip rip authentication cisco-compatible

 Command: ip rip authentication cisco-compatible

 no ip rip authentication cisco-compatible

 Function: After configured this command, the cisco RIP packets will be receivable by

configuring the plaintext authentication or MD5 authentication.

 Parameter: None

 Default: Not configured