Qtech QSW-8200-28T-AC-DC [38/74] Neighbor

User Manual

Chapter 3. Commands for RIP 38

www.qtech.ru

the show ip route statistics command.

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# maximum-prefix 150

3.26 neighbor

 Command: neighbor <A.B.C.D>

 no neighbor <A.B.C.D>

 Function: Specify the destination address requires targeted-peer sending. The “no

neighbor <A.B.C.D>” command cancels the specified address and restores all gateways

to trustable.

 Parameter: <A.B.C.D> is the specified destination address for the sending, shown in

dotted decimal notation.

 Default: Not sending to any targeted-peer destination address.

 Command Mode: Router mode

 Usage Guide: When used accompany with passive-interface command it can be

configured to only sending routing messages to specific neighbor.

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# neighbor 1.1.1.1

 Related Command: passive-interface

3.27 network

 Command: network <A.B.C.C/M|ifname>

 no network <A.B.C.C/M|ifname>

 Function: Configure the RIP protocol network.

 Parameter: <A.B.C.C/M|> is the IP address prefix and its length in the network.

 <ifname> is the name of a interface.

 Default: Not running RIP protocol

 Command Mode: Router mode and address-family mode

 Usage Guide: Use this command to configure the network for sending or receiving RIP

update packets. If the network is not configured, all interfaces of the network will not

be able to send or receive data packets.

 Example: Switch# config terminal