Qtech QSW-8200-28T-AC-DC [46/74] Show ip rip database vrf

User Manual

Chapter 3. Commands for RIP 46

www.qtech.ru

 Command: show ip rip

3.40 show ip rip database vrf

 This command is not supported by the switch.

3.41 show ip rip interface

 Command: show ip rip interface [<ifname>]

 Function: Show the RIP related messages.

 Parameter: <ifname> is the name of the interface to show the messages.

 Command Mode: Any mode.

 Example: Switch# show ip rip interface vlan 1

 Vlan1 is up, line protocol is up

 Routing Protocol: RIP

 Receive RIP packets

 Send RIP packets

 Passive interface: Disabled

 Split horizon: Enabled with Poisoned Reversed

 IP interface address:10.1.1.1/24

3.42 show ip rip interface vrf

 This command is not supported by the switch.

3.43 show ip rip aggregate

 Command: show ip rip aggregate

 Function: To display the information of IPv4 aggregation route.

 Parameter: None.

 Command Mode: Admin and Configuration Mode.

 Default: None.

 Usage Guide: This command is used to display which interface the aggregation route be

configured, Metric, Count, Suppress and so on. If configured under global mode, then

the interface display “----”, “Metric” is metric. “Count” is the number of learned

aggregation routes. “Suppress” is the times of aggregation.

 Example: To display the information of IPv4 aggregation route.