Planet IGS-801 [18/120] User s manual of igs 801m

User’s Manual of IGS-801M

2.2.3 Wall Mount Plate Mounting

To install the Industrial Gigabit Ethernet Switch on the wall, please follows the instructions described below.

Step 1: Remove the DIN-Rail from the Industrial Gigabit Ethernet Switch; loose the screws to remove the DIN-Rail.

Step 2: Place the wall mount plate on the rear panel of the Industrial Gigabit Ethernet Switch.

Step 3: Use the screws to screw the wall mount plate on the Industrial Gigabit Ethernet Switch.

hernet Switch on the

Step 5: ove the wall mount plate, reverse steps above.

2.2.4 Wiring the Power Inputs

anel of IGS-801M is used for two DC redundant power input. Please

. Insert positive / negative DC power wires into the contacts 1 and 2 for POWER 1, or 5 and 6 for POWER 2.

Step 4: Use the hook holes at the corners of the wall mount plate to hang the Industrial Gigabit Et

wall.

To rem

The 6-contact terminal block connector on the top p

follow the steps below to insert the power wire.

Figure 2-5 Wiring the redundant power inputs