Hitachi CJ14DSL [15/100] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi CJ14DSL [15/100] English

Hitachi CJ14DSL [15/100] English
English
14
MAINTENANCE AND INSPECTION
1. Inspecting the blade
Continued use of a dull or damaged blade will result
in reduced cutting efficiency and may cause
overloading of the motor. Replace the blade with a
new one as soon as excessive abrasion is noted.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do
so could result in serious hazard.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the
power tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Cleaning of the outside
When the cordless jig saw is stained, wipe with a
soft dry cloth or a cloth moistened with soapy water.
Do not use chloric solvents, gasoline or paint thinner,
as they melt plastics.
5. Storage
Store the cordless jig saw in a place in which the
temperature is less than 40°C, and out of reach of
children.
6. Service parts list
CAUTION
Repair, modification and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATION
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
NOTE:
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 95 dB (A)
Measured A-weighted sound pressure level: 84 dB (A)
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Cutting wood:
Vibration emission value
ah, CW = 8.0 m/s
2
Uncertainty K = 4.6 m/s
2
Cutting sheet metal:
Vibration emission value ah, CM = 5.2 m/s
2
Uncertainty K = 1.5 m/s
2
WARNING
䡬 The vibration emission value during actual use of the
power tool can differ from the declared value
depending on the ways in which the tool is used.
䡬 To identify the safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
01Eng_CJ14DSL_EE 3/19/08, 13:4514

Содержание

Похожие устройства

English MAINTENANCE AND INSPECTION 1 Inspecting the blade Continued use of a dull or damaged blade will result in reduced cutting efficiency and may cause overloading of the motor Replace the blade with a new one as soon as excessive abrasion is noted 2 Inspecting the mounting screws Regulariy inspect all mounting screws and ensure that they are properly tightened Should any of the screws be loose retighten them immediately Failure to do so could result in serious hazard 3 Maintenance of the motor The motor unit winding is the very heart of the power tool Exercise due care to ensure the winding does not become damaged and or wet with oil or water 4 Cleaning of the outside When the cordless jig saw is stained wipe with a soft dry cloth or a cloth moistened with soapy water Do not use chloric solvents gasoline or paint thinner as they melt plastics 5 Storage Store the cordless jig saw in a place in which the temperature is less than 40 C and out of reach of children 6 Service parts list CAUTION Repair modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance In the operation and maintenance of power tools the safety regulations and standards prescribed in each country must be observed MODIFICATION Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements Accordingly some parts may be changed without prior notice Information concerning airborne noise and vibration The measured values were determined according to EN60745 and declared in accordance with ISO 4871 Measured A weighted sound power level 95 dB A Measured A weighted sound pressure level 84 dB A Uncertainty KpA 3 dB A Wear hearing protection Vibration total values triax vector sum determined according to EN60745 Cutting wood Vibration emission value 3h CW 8 0 m s2 Uncertainty K 4 6 m s2 Cutting sheet metal Vibration emission value 3h CM 5 2 m s2 Uncertainty K 1 5 m s2 WARNING O The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used O To identifythe safety measures to protecttheoperator that are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specific regulation This guarantee does not cover defects or damage due to misuse abuse or normal wear a nd tear In case of complaint please send the Power Tool undismantled with the GUARANTEE CERTIFICATE found at the end of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program of research and development the specifications herein are subject to change without prior notice 14

Скачать