Jungheinrich ERC 214 [207/214] Õungheinrich event messages

õUNGHEINRICH Event Messages

03.15207

_9391Operation

Seat switch and deadman

switch on passenger seat

implausible

The event message is triggered

if for T > 500 ms the following applies:

•The combination of seat and deadman switch for the

passenger seat is invalid (0/1 or 1/0)

-Check seat / deadman switch on passenger

seat;

-Note to operator in case of incorrect operation;

_9401Operation

Parking brake button applied

for too long

The parking brake pre-selection is activated and the high

level of the parking brake signal has been detected for

longer than 5 secs.

-This event message is an information message;

-Do not apply the parking brake button;

_9411Operation

Backup dongle save or

restore active

The master saves the parameters in the Backup dongle

or restores the settings from the backup dongle.

-This event message is an information message;

-Do not switch the system off;

_9421OperationReservoir level too lowThe reservoir level is below 2% of the reservoir volume

-This event message is an information message;

-Replenish in accordance with operating

instructions;

_9431Operation

Operating position

monitoring time exceeded

The event message is triggered when the following

applies:

•After T > time limit, no operating position change

detected

-This event message is an information message;

-Perform status change of operating position

switch;

_9511…n

System start

Operation

“Hydraulic setpoint” on

system start or safety switch

application invalid

MULTI-PILOT:

This event message is triggered

if for T >= 500msec the following applies:

When the system starts the setpoint of at least one

hydraulic function is not equal to zero.

When the safety switch was pressed a setpoint of at

least one hydraulic function was present.

This event message can be triggered by incorrect

operation.

-Do not apply the MULTI-PILOT;

-Check the MULTI-PILOT zero position;

-Check wire connections within the MULTI-

PILOT;

-Check the control on MULTI-PILOT and replace

if necessary;

-Re-teach the MULTI-PILOT;

-Replace the MULTI-PILOT;

Safety switches can include:

- Totmanntaster (Fußtaster),

- Seat switch,

- Tiller switch.

F E XX SOperational

Status

DescriptionCause / Triggering EventAction

Jungheinrich ERC 214 [207/214] Õungheinrich event messages

Содержание

Похожие устройства