Jungheinrich ERC 214 [9/214] Õungheinrich event messages
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Jungheinrich ERC 214 [9/214] Õungheinrich event messages

Jungheinrich ERC 214 [9/214] Õungheinrich event messages
õUNGHEINRICH Event Messages
03.159
G
_1072Operation
Acknowledge button inputs
implausible
During operation combinations 0/0 and 1/1 (500 msec.)
trigger the event message.
For a valid combination (0/1 or 1/0, 500msecs) the event
and the truck response are reset.
-Check wire connections;
-Check button;
-Replace button;
_1081Operation
Touch mode switch inputs
implausible
The touch mode button consists of a NC and a NO
contact. When the button is pressed both contacts
connect simultaneously. As a result, only the 0/1 and 1/0
combinations should occur.
During operation combinations 0/0 and 1/1 (500msec.)
trigger the event message.
For a valid combination (0/1 or 1/0, 500msec) the event
message and the truck response are reset.
-Check wire connection;
-Check touch mode button;
-Replace touch mode button;
_1082Operation
"Crawl speed redundant
inputs" logic implausible
The "inching" button consists of a NC and a NO contact.
When the button is pressed both contacts switch
simultaneously. As a result, only the 0/1 and 1/0
combinations should occur.
During operation the combinations
0/0 and 1/1 (switched for 500msec.) activate the event
message.
For a valid combination (0/1 or 1/0, switched for 500
msec.)
the event and truck response are reset. The status is
assessed as an actuated status (adjustable inching
speed active)
-Check wire connections;
-Check crawl speed button;
-Replace crawl speed button;
_1083Operation
“Stop" button redundant
inputs” logic improbable
The "Stop" button consists of an NC and an NO contact.
When the button is pressed both contacts switch
simultaneously. As a result, only the 0/1 and 1/0
combinations should occur.
During operation the combinations
0/0 and 1/1 (500msec) trigger the event message.
For a valid combination (0/1 or 1/0, 500msec) the event
message and the truck's response are reset.
-Check parameter reading (side pedestrian mode
activated?);
-Check wire connections;
-Press "Stop" button;
-Replace "Stop" button;
F E XX SOperational
Status
DescriptionCause / Triggering EventAction

Содержание

Похожие устройства

Скачать