Husqvarna 553RS (9667800-02) [39/788] General safety precautions
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Husqvarna 553RS (9667800-02) [39/788] General safety precautions

Husqvarna 553RS (9667800-02) [39/788] General safety precautions
GENERAL SAFETY PRECAUTIONS
English – 39
Quick release
There is an easily accessible, quick release fitted at the
front as a safety precaution in case the engine catches
fire, or in any other situation that requires you to free
yourself from the machine and harness. See instructions
under the heading Adjusting the harness and brush
cutter.
Check that the harness straps are correctly positioned.
Once the harness and machine have been adjusted,
check that the harness quick release works correctly.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to
the machine.
Locking nut
A locking nut is used to secure some types of cutting
attachment.
When fitting, tighten the nut in the opposite direction to the
direction of rotation of the cutting attachment. To remove
it, undo the nut in the same direction as the cutting
attachment rotates. (CAUTION! The nut has a left-hand
thread.) Tighten the nut using the socket spanner.
The nylon lining inside the locking nut must not be so worn
that you can turn it by hand. The lining should offer a
resistance of at least 1.5 Nm. The nut should be replaced
after it has been put on approx. 10 times.
!
WARNING! The inside of the muffler
contain chemicals that may be
carcinogenic. Avoid contact with these
elements in the event of a damaged
muffler.
!
WARNING! Bear in mind that: The
exhaust fumes from the engine are hot
and may contain sparks which can start
a fire. Never start the machine indoors or
near combustible material!
1-H1158941-01,533-553RS west.fm Page 39 Tuesday, July 11, 2017 2:29 PM

Содержание

Похожие устройства

I HI158941 01 533 553RS west fm Page 39 Tuesday July 11 2017 2 29 PM GENERAL SAFETY PRECAUTIONS Quick release There is an easily accessible quick release fitted at the front as a safety precaution in case the engine catches fire or in any other situation that requires you to free yourself from the machine and harness See instructions under the heading Adjusting the harness and brush cutter Regularly check that the muffler is securely attached to the machine WARNINGIThe Inside of the muffler contain chemicals that may be carcinogenic Avoid contact with these elements In the event of a damaged muffler Check that the harness straps are correctly positioned Once the harness and machine have been adjusted check that the harness quick release works correctly Muffler The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user WARNING Bear In mind that The exhaust fumes from the engine are hot and may contain sparks which can start a fire Never start the machine Indoors or near combustible material Locking nut A locking nut is used to secure some types of cutting attachment Never use a machine that has a faulty muffler When fitting tighten the nut in the opposite direction to the direction of rotation of the cutting attachment To remove it undo the nut in the same direction as the cutting attachment rotates CAUTION I The nut has a left hand thread Tighten the nut using the socket spanner The nylon lining inside the locking nut must not be so worn that you can turn it by hand The lining should offer a resistance of at least 1 5 Nm The nut should be replaced after it has been put on approx 10 times

Скачать