Stihl MSA 161 T 10 [55/180] Engaging and disengaging the chain brake

Stihl MSA 161 T 10 [55/180] Engaging and disengaging the chain brake
0458-791-9621-B
53
English
7 Engaging and Disengaging the Chain Brake
Place the cap in the filler opening so that mark (1) lines up
with mark (2).
Press the cap down and rotate it clockwise as far as stop.
The cap snaps into place. The mark (1) points to mark (3),
Check to see if the oil tank cap can be pulled upwards and
off.
If the oil tank cap cannot be pulled upwards and off: Fold
down the grip on the oil tank cap.
The oil tank is closed.
If the oil tank cap can be pulled upwards and off, perform the
following steps:
Place the oil tank cap in the filler opening in any position.
Press the cap down and rotate it clockwise as far as stop.
Press the cap down and rotate it counterclockwise until
mark (1) points to mark (2).
Now try again to close the oil tank.
If the oil tank still cannot be closed properly: Do not use
the chainsaw and contact a STIHL dealer for assistance.
The chainsaw is not in a safe condition.
6.4 Mounting the Spiked Bumper
Take out the screw (4) and remove the chain catcher (3).
Place the spiked bumper (1) in position.
Fit the screw (2).
Place the chain catcher (3) in position.
Insert and tighten down the screw (4) firmly.
Tighten down the screw (2) firmly.
7.1 Engaging the Chain Brake
The saw is equipped with a chain brake.
The chain brake is activated by the inertia of the front hand
guard if the kickback force is high enough or can be engaged
by the operator.
2
3
1
0000-GXX-2931-A0
1
1
0000-GXX-3135-A0
2
7 Engaging and Disengaging the Chain
Brake
0000-GXX-4445-A0
1
2
4
3

Содержание

Похожие устройства

Скачать