LINE 6 Relay G75 [26/40] Using the tuner output

5•13

How To...

Relay G70/G75 Advanced Guide

Using the Built-in Tuner & the Tuner Output

If no cable is plugged into the Receiver’s Tuner Output, and the Select/Mute footswitch

(G70) or button (G75) is held down for more than 2 seconds, all Outputs will mute and the

Relay’s built-in Tuner is displayed. The built-in chromatic Tuner is able to be used with any

instrument that is connected to the current Scene’s Transmitter Channel or Aux Input. Just

pluck a note and adjust your tuning until the screen indicates it is “in tune.” You’ll also see

that your Scene’s current Channel input number (or Aux In symbol) remains displayed at the

left of the LCD screen for easy reference. To exit Tuner/Mute Mode, press Select/Mute

footswitch/button again, or press the HOME button.

Channel

indicator

Pitch indicator

Sharp Flat In Tune

The G70/G75 Built-in Tuner screen

Using the Tuner Output

If you prefer to use your own external Tuner, just connect it to the Tuner Output on

your Relay G70/G75 Receiver. Whenever a cable is plugged into the Tuner Output,

holding down the Select/Mute footswitch/button will mute all Outputs except the

Tuner Output, and the Receiver’s LCD will display a ashing muted speaker symbol. This

mute functionality allows you to use your external Tuner silently. To exit Tuner/Mute Mode,

press Select/Mute footswitch/button again, or press the HOME button.

Transmitter Details (Relay TB516 G)

Locking Guitar Cable Connection

The Relay TB516 G Transmitter uses a very simple 1/4” guitar cable* input, with the ability

to lock the cable to the Transmitter (see page 3•1). Locking helps avoid accidental drops

and inadvertent disconnections from random tugs or catches on the exposed guitar cable.

To lock the cable, simply plug in the end with the locking collar and gently twist it so that it

tightens onto the exposed threads of the Transmitter’s input jack. Snug is ne, there is no

need to make this connection extremely tight. To unlock, simply spin the collar counter-

clockwise and pull the plug out.

*The locking feature requires use of the provided Line 6 cable. The locking cable is included in the box

with the system, or can be purchased as an accessory using the part number 98-033-0072. The opposite

(guitar) end of the cable is available with a right angle 1/4” plug as part number 98-033-0075.