LINE 6 POD HD Desktop Руководство по эксплуатации онлайн [71/113] 777370

Using the Looper

8•3

Note: If you record your Loop in POST mode and then switch to PRE for Loop playback,

this results in the current Amp+FX to be applied to the Loop playback (where the Loop was

already recorded with Amp+FX applied). Be aware that this can cause the Loop playback

to be signiﬁcantly louder!

RECORD/OVERDUB - To record a Loop, press the RECORD (A) button and the Looper

will immediately start recording. The button will remain lit while recording is active.

You’ll see the Performance View display the following:

• The Record function shows “DUB IN.” Pressing the RECORD button will

immediately put you into Overdub-Record mode.

• If you press RECORD at this time, whatever you play will be recorded

on top of the original Loop recording, and you’ll see the Performance

View indicator show “DUB OUT.” Press the button again to stop the

overdub recording.

• The Play/Record function shows “STOP” to indicate that pressing the

PLAY/STOP button will stop playback & recording.

Note: Once you have a Loop recorded, you can layer an overdub on top of your current

Loop at any time. Simply play back the Loop and step on the REC/OVERDUB switch press

the RECORD button while the Loop is playing. Your new live guitar will be recorded on

top of your previously recorded Loop. You can repeat this step and layer as many overdubs

as you like!

If you press RECORD while Loop playback is stopped, this will always record a new Loop,

and any previously recording will be discarded.