Karcher TB 50 [14/168] Accessories and spare parts

Karcher TB 50 [14/168] Accessories and spare parts
In case of an error, the status LED at the front of the transmitter
displays the cause of the fault. This is done via different blinking
sequences. The blinking sequences and the measures to remedy
the respective causes are as follows:
Receiver fault display
LED blink-
ing codes
Cause Measure
2 x blinking TransKey not detect-
ed
Plug in the TransKey
3 x blinking The pair transmitter-
receiver TransKey is
incorrect
Connect the correct
TransKey pair
4 x blinking Fault during the low
voltage test while
switching on the de-
vice
Replace PCB
5 x blinking Fault K0 relay Check the K0 relay
6 x blinking Fault occurs during
the back reading of
the relay contacts
Replacing the relay PCB
7 x blinking Wrong RF module or
RF module config-
ured incorrectly or
defective
Replace the RF module
or correct the configura-
tion
8 x blinking General System
Fault
Replace PCB
9 x blinking Low voltage of the
supply voltage de-
tected
Check supply voltage.
10 x blinking Detected error from
the 2nd processor
Replace the processor
board
Accessories and Spare Parts
Part number
6.635-599.0 Portable transmitter
6.635-600.0 Receiver
6.635-601.0 Power supply
6.635-597.0 NiMH batteries
6.635-598.0 Charging bowl
6.635-602.0 TransKey pair channel 10
6.635-603.0 TransKey pair channel 20
6.635-604.0 TransKey pair channel 30
6.635-605.0 TransKey pair channel 40
6.635-606.0 TransKey pair channel 50
6.635-607.0 TransKey pair channel 60
6.635-608.0 EUR mains plug
6.635-609.0 GB mains plug
6.635-610.0 US mains plug
6.635-611.0 AU mains plug
14 EN

Содержание

Скачать