![Konica Minolta EP1085 [30/115] Minimizing the warm up time](/img/pdf.png)
Konica Minolta EP1085 [30/115] Minimizing the warm up time
![Konica Minolta EP1085 [30/115] Minimizing the warm up time](/views2/1122104/page30/bg1e.png)
2
Getting to Know Your Copier
2-14 EP1085
Minimizing the Warm-up Time
Insteadof turningthecopier OFF, it’sa good ideato use the EnergySaver
Mode. This mode will minimize the time for the copier to complete the
warm-up cycle to about 20 sec.
The Energy Saver Mode is automatically activated a given period of time
after the copier has been used last. The initial is 15 min.
Useful Tip
The time for the copier to enter the Energy Saver Mode can be
selectedfrom 1 to 98 min.,or for 240 min. by using User’sChoice, see
page 4-10.
NOTE
è The copier is shut down if the Auto Shut OFF function activates while
the copier is in the Energy Saver Mode.
Entering The Energy Saver Mode
Press the Energy Saver Key on the
control panel.
All control panel Indicators go out,
except that the Start Key and the
Energy Saver Key which remain lit
green.
Leaving the Energy Saver Mode
Press any Key on the control panel,
for instance, the Start Key.
This cancels the Energy Saver
Mode, and the copier will be ready
to make copies in about 20
seconds.
Energy Saver
Panel Reset
1142O093CA
1139O2360A
Содержание
- Contents 1
- Ep1085 user manual 1
- Getting to know your copier 1
- Safety notes 1
- Table of contents 1
- Making copies 2
- Auxiliary functions 3
- When an indicator lights up 3
- Miscellaneous 4
- Specifications 4
- Troubleshooting 4
- Foreword 5
- Using the copier properly 5
- What is an energy star copier 7
- Ce marking declaration of conformity 8
- Ep1085 8
- Please use this manual as a quick and handy reference tool for immediately clarifying any questions which may arise 8
- Thank you for choosing minolta 8
- This operator s manual explains how to operate the copier and replenish its supplies it also gives some troubleshooting tips as well as general precautions to be observed when operating the copier 8
- To ensure the best performance and effective use of your copier read this manual carefully until you familiarize yourself thoroughly with its operation and features after you have read through the manual keep it for ready reference 8
- We declare under our sole responsibility that this copier and options to which this declaration relates is in conformity with the specifications below this declaration is valid for the area of the european union eu only 8
- X 4 ep1085 8
- Feeding direction copy paper path 9
- Terms and symbols for the type of originals and copy paper 9
- Width and length 9
- Terms and symbols used 10
- Installation site 11
- Installing the copier 11
- Power source 11
- Safety notes 11
- Grounding 12
- 469 372 13
- Be sure to allow a clearance of 150mm or more at the back of the be sure to allow a clearance of 150mm or more at the back of the copier as there is a ventilation duct 13
- Ep1085 1 3 13
- Safety notes 13
- Space requirements 13
- To ensure easy copier operation supply replacement and service maintenance adhere to the recommended space requirements detailed below 13
- Operating environment 14
- Precautions for use 14
- Using the copier properly 14
- Care of copier supplies 15
- Moving 15
- Financial instruments 16
- General 16
- Legal documents 16
- Legal restrictions on copying 16
- Automatic document feeder af 5 option 17
- Bin sorter s 106 option 17
- Ep1085 17
- Getting to know your copier 17
- Multi bypass tray mb 4 option 17
- System overview 17
- 2 ep1085 18
- 7 8 9 10 18
- Copier parts and accessories 18
- Getting to know your copier 18
- Outside copier 18
- Ep1085 2 3 19
- Getting to know your copier 19
- Inside copier 19
- 4 ep1085 20
- Getting to know your copier 20
- Automatic document feeder af 5 21
- Ep1085 2 5 21
- Getting to know your copier 21
- 6 ep1085 22
- Bin sorter s 106 22
- Getting to know your copier 22
- Multi bypass tray mb 4 22
- 11 10 9 8 7 23
- 5 4 3 2 1 23
- Control panel 23
- Control panel keys and indicators 23
- Ep1085 2 7 23
- Getting to know your copier 23
- 14 15 16 24
- 18 19 20 21 22 23 24
- 8 ep1085 24
- Getting to know your copier 24
- Display 25
- Monitor display 25
- Paper information display 26
- Zoom ratio indicator multi copy display 26
- Exposure information display 27
- Turning on and off 28
- Turning on and off and resetting the copier 28
- When the copier is turned on 28
- Auto copy start function only when automatic document feeder is used 29
- Using the function 29
- Minimizing the warm up time 30
- Initial mode and panel resetting 31
- Auto reset function 32
- Copying overview 33
- Making copies 33
- Copying procedure 36
- Highly transparent originals 36
- Placing originals 36
- Sheet originals standard size 36
- Book original 37
- Using the automatic document feeder 38
- Loading standard size originals 39
- For originals not suitable for reliable operation of the automatic document feeder 40
- Single automatic document feeding mode sadf mode 41
- Checking the copy paper size and selecting the paper source 42
- Selecting the paper source only when the multi bypass tray is used 42
- Fixed zoom ratios 43
- Zoom ratio 43
- Zoom ratios 43
- Selecting the fixed zoom ratios 44
- Setting a zoom ratio 45
- Auto size mode 46
- Selecting the auto size mode 46
- Image density 47
- Types of exposure modes 47
- Selecting the auto exposure mode 48
- Selecting the manual exposure mode 48
- Selecting the photo mode 48
- Book copying 49
- Selecting the book copying mode 49
- Finishing mode 51
- Types of finishing modes 51
- Selecting the finishing mode 52
- Auto dual function 53
- Auto dual function in the sort mode 53
- Manual bypass copying 54
- Using the manual bypass tray 55
- Using the multi bypass tray option 55
- Auxiliary functions 57
- Checking the total number of copies mode 57
- Counter display 57
- Types of counters 57
- Using the meter count function 58
- Toner replenisher function increasing the image density 59
- Drum dehumidifier function 60
- 6 ep1085 62
- As well as originals of the standard weight lightweight original mode 62
- Auxiliary functions 62
- By setting defaults for the paper size zoom ratio and other settings that are most frequently used time and effort to make extra settings will be eliminated when the copier is turned on or when the auto reset function is activated 62
- Description of each user s choice function 62
- For more details consult your technical representative 62
- Functions available in user s choice 62
- If 0 is selected you can make copies only from originals of standard weight normal mode 62
- If 1 is selected you can make copies from lightweight originals 40g 62
- Select either one of the following settings when the copier is equipped with the automatic document feeder 62
- The copier has been set so that the most frequently used settings are automatically selected in the initial mode the user s choice allows you to select the default settings which are automatically selected in the initial mode according to your own needs 62
- To 50g 62
- U 4 lightweight original mode 62
- User s choice 62
- Auxiliary functions 63
- Determines the default exposure level in the auto exposure mode 63
- Ep1085 4 7 63
- Specifies the default mode automatically selected in the initial mode 63
- This function can disable the auto shut off function 63
- U 12 auto size manual priority 63
- U 13 default auto exposure level 63
- U 7 non auto shut off 63
- When the exposure level is high the greater the level number is the higher the exposure level 63
- When the exposure level is low the greater the level number is the lower the exposure level 63
- 8 ep1085 64
- Auto exposure mode as default 64
- Auxiliary functions 64
- Determines the default exposure mode either auto or manual selected when the control panel settings are reset 64
- If any value between 0 and 8 is selected the auto exposure mode is selected 64
- If any value between 10 and 18 is selected the manual exposure mode is selected 64
- If auto is selected this function also allows you to specify the default exposure level exp in the manual exposure mode after the auto exposure mode has been canceled 64
- If manual is selected the function also allows you to specify the default exposure level exp in the manual exposure mode 64
- Refer to the next page for the manual exposure mode 64
- U 14 default exposure mode level 64
- 3 4 5 6 7 8 9 65
- Auto photo 65
- Auxiliary functions 65
- Determines the default finishing mode when the copier is equipped with the sorter 65
- Ep1085 4 9 65
- Lighter darker 65
- Manual exposure mode as default 65
- U 15 default finishing mode 65
- With exp5 at the central level the exposure level is lower as the number becomes smaller and it is higher as the number becomes greater 65
- 10 ep1085 66
- Auxiliary functions 66
- If 0 is selected the control panel settings remain valid even after 60 seconds 66
- If 1 is selected the control panel settings are canceled and the copier is reset into the default mode after 30 seconds auto panel reset 66
- If 2 is selected the control panel settings are canceled and the copier is reset into the default mode after 60 seconds auto panel reset 66
- Select whether or not to set the copier into the energy saver mode after the lapse of a given period of time after a copy cycle has been completed or a key on the control panel has been operated 66
- Selects whether to activate the auto panel reset function 60 seconds after a copy cycle has been completed or a control panel key has been pressed 66
- The initial setting is 15 min 66
- The period of time can fall within the range of 1 to 98 min or be set to 240 min 66
- U 20 auto panel reset on off 66
- U 21 energy saver on timing 66
- Auxiliary functions 67
- Conditions the copy cycle is initiated using a single original in the sort mode the copy cycle is initiated to make two or more copies using two or more originals in the non sort mode 67
- Determines whether the copier is set into the initial mode when the plug in counter is pulled out after a copy cycle has been run using the plug in counter 67
- Ep1085 4 11 67
- If you want to disable the auto shut off function first select 1 in the non auto shut off mode then select 0 in this mode see page 4 7 67
- Select whether or not to enable the auto shut off function that turns power off automatically after the lapse of a given period of time after a copy cycle has been completed or a key on the control panel has been operated in the initial setting the auto shut off function is activated after 30 min 67
- Specifies whether to enable automatic switching between the sort and non sort mode under the following conditions when the copier is equipped with the sorter and the automatic document feeder 67
- U 23 auto panel reset for plug in counter 67
- U 24 sort non sort auto switching on off 67
- U 28 auto shut off timing 67
- Making the user s choice mode settings 68
- Auxiliary functions 69
- Ep1085 4 13 69
- For the choice code see page 4 6 69
- Press the clear key 69
- Press the start key 69
- Repeat steps 2 to 6 to make new settings for other user s choices 69
- The multi copy display shows the new setting 69
- This clears the current setting 69
- This enters the new setting 69
- Using the key pad enter the new setting 69
- A control panel key or keys have been incorrectly operated 71
- Ep1085 5 1 71
- Not all necessary conditions are met to start a copy cycle 71
- Quick reference for indicator lights 71
- The copier requires the operator s intervention during a copy cycle 71
- The following table explains the most important warning conditions you will find more detailed procedures on the page referenced in the action column 71
- Warning indicators 71
- When an indicator lights up 71
- When the copier encounters any of the following conditions a corresponding warning indicator lights up some of the warning conditions entail inhibition of the initiation of a copy cycle 71
- Add toner indicator 72
- Detailed instructions for indicator lights 72
- Replacing the toner bottle 72
- Add paper indicator 74
- Adding paper drawer 74
- Adding paper multi bypass tray 75
- Closure failure indicator 76
- Misfeed indicator 77
- Misfeed indicator and monitor display 77
- Misfeed clearing procedure 78
- Automatic document feeder 82
- Sorter 84
- Call tech rep indicator 85
- Resetting the call tech rep indicator 85
- I u service life indicator lights up 86
- Precautions for handling 87
- Removing the i u from the copier 88
- Setting up the i u 89
- Unpacking the i u 89
- Charging the copier with starter and toner 91
- Ep1085 6 1 95
- Troubleshooting 95
- When this type of copy is produced 95
- 2 ep1085 96
- Troubleshooting 96
- Ep1085 6 3 97
- If these procedures do not correct the problem contact your technical representative 97
- The copier is not functioning as designed 97
- Troubleshooting 97
- Turn the copier off immediately unplug the power cord and call your technical representative 97
- Copier ep1085 99
- Ep1085 7 1 99
- Specifications 99
- 2 ep1085 100
- Automatic document feeder af 5 100
- Specifications 100
- Bin sorter s 106 101
- Ep1085 7 3 101
- Multi bypass tray mb 4 101
- Specifications 101
- Care of the copier 103
- Communications cable cable connecting the copier with options 103
- Daily checks 103
- Ep1085 8 1 103
- Miscellaneous 103
- Original cover automatic document feeder 103
- Original glass 103
- Power cord communications cable ground cable 103
- To keep your copier in good shape at all times make the following daily checks and cleaning 103
- Cleaning 104
- Copier housing temperature 104
- Copy paper 104
- Housing 104
- Original pad 104
- Sound of copier operation 104
- Control panel 105
- Front door 105
- Original glass 105
- Corona units 106
- Document transport belt 107
- 6 ep1085 108
- Miscellaneous 108
- Paper size 108
- Paper size and zoom ratio table 108
- 1 inch 25 mm 109
- 1mm 0 394 inch 109
- Ep1085 8 7 109
- Miscellaneous 109
- Zoom ratio copy paper size original size 109
- Zoom ratio table original size to copy paper size 109
- 8 ep1085 110
- Miscellaneous 110
- Ep1085 8 9 111
- Miscellaneous 111
Похожие устройства
- Konica Minolta EP2010 Инструкция по эксплуатации
- Konica Minolta EP2030 Инструкция по эксплуатации
- Velas VR-204 Инструкция по эксплуатации
- Konica Minolta EP2050 Инструкция по эксплуатации
- Velas VR-203 Инструкция по эксплуатации
- Konica Minolta EP2051 Инструкция по эксплуатации
- Velas VR-202 Инструкция по эксплуатации
- Konica Minolta EP2080 Инструкция по эксплуатации
- Velas VR-201 Инструкция по эксплуатации
- Benq FP556ms Инструкция по эксплуатации
- Velas VA-1101D Инструкция по эксплуатации
- Konica Minolta EP2100 Инструкция по эксплуатации
- Velas VA-1001D Инструкция по эксплуатации
- Konica Minolta EP2120 Инструкция по эксплуатации
- Velas VA-1104 Инструкция по эксплуатации
- Benq FP556s Инструкция по эксплуатации
- Velas VA-1014 Инструкция по эксплуатации
- Konica Minolta EP2121 Инструкция по эксплуатации
- Velas VA-1102 Инструкция по эксплуатации
- Konica Minolta EP2130 Инструкция по эксплуатации