D-Link des-1228/me/b1 [249/413] Routing table commands

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide

245

ROUTING TABLE COMMANDS

The Routing Table commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the

following table.

Command Parameters

create iproute [default] <ipaddr> {<metric 1-65535>}

delete iproute [default]

show iproute {<network_address> | static}

create ipv6route [default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] {<metric

1-65535>}

delete ipv6route [[default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] | all]

show ipv6route

Each command is listed, in detail, in the following sections.

create iproute

Purpose

Used to create IP route entries to the Switch’s IP routing table.

Syntax

create iproute [default] <ipaddr> {<metric 1-65535>}

Description

This command is used to create a default static IP route entry to the

Switch’s IP routing table.

Parameters

<ipaddr> − The gateway IP address for the next hop router.

<metric 1-65535> − Allows the entry of a routing protocol metric

entry representing the number of routers between the Switch and

the IP address above. The default setting is 1.

Restrictions

Only Administrator level, Operator level or Power User level users

can issue this command.

Example usage:

To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table:

DES-1228/ME:5#create iproute default 10.48.74.121 1

Command: create iproute default 10.48.74.121 1

Success.

DES-1228/ME:5#