Konica Minolta BizHub 3622 [44/202] Adjusting the fax darkness

Adjusting the fax darkness

1 Load an original document into the ADF tray or on the scanner glass.

2 From the control panel, navigate to:

> Fax > > enter the needed information >

3 Adjust the Darkness setting.

4 Send the fax job.

Viewing a fax log

1 Open a Web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Reports > Fax.

3 Click Fax Job Log or Fax Call Log.

Blocking junk faxes

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls.

3 Select Block No Name Fax.

4 Apply the changes.

Holding a fax

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Fax > Analog Fax Setup > Fax Receive Settings > Holding Faxes.

Faxing 44