Delonghi vvx 1650 [6/58] Electrical requirements uk only

Electrical requirements (UK only)

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you

are in any doubt about your supply contact your local electricity company.

The ﬂexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.

Should this plug not ﬁt the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the proce-

dure outlined below.

Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children

might ﬁnd it and plug it into a supply socket - with the obvious consequent danger.

N.B. We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use.

IMPORTANT: the wires in the mains lead ﬁtted to this appliance are coloured in accordance with the following code:

GREEN AND YELLOW EARTH

BLUE NEUTRAL

BROWN LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

- The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol

coloured green or green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

- The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains

lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualiﬁed

electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualiﬁed electrician and should

only be replaced with a ﬂexible cord of the same size.

After replacement of a fuse in the plug, the fuse cover must be reﬁtted. If the fuse cover is lost, the plug must not be used until a

replacement cover is obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse

recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover.

Only 13amp replacement fuses which are asta approved to B.S. 1362 should be ﬁtted.

This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.

Warning - this appliance must be earthed

Green and Yellow to Earth

13 amp

Fuse

Brown to

live

Cord Clamp

Blue to

neutral