![Grillo BEEFLY 700 SR — уход и обслуживание газонокосилок: советы и рекомендации [20/79]](/img/pdf.png)
Grillo BEEFLY 700 SR — уход и обслуживание газонокосилок: советы и рекомендации [20/79]
18
CLEANING
Clean the deck, the entry ducts, the turbine and the basket. Do not wash the engine compartment with water under
pressure, use compressed air or a vacuum cleaner.
STORAGE AND LACK OF USE FOR LONG PERIODS
Store the machine in a dry environment, sheltered from the elements and, if possible, covered up.
If the mower will not be used for a long period (more than one month), disconnect the red lead from the battery and
follow the directions given in the engine manual; in addition grease all the joints.
Check regularly that the battery voltage has not dropped below 12 Volts and if it does so, recharge it.
For machines with petrol engines use a conserving additive for unleaded petrol.
ACCESSORIES
150 CM SIDE DISCHARGE CUTTING DECK
This is suitable for mowing in parks or gardens which are so large that grass collection is unnecessary.
If the grass is not too high and the engine is not pushed too hard, work in such a way that the cut grass is spread
over the grass still to be cut; in this way the lawnmower will pass several times over the grass already cut, shredding
it finely and dispersing it over the lawn.
Use the 4 pins (fig. 34) to adjust the cutting height.
The grass is discharged through an outlet fitted with a bar to prevent the ejection of objects and this bar must not
be removed under any circumstances. When working near roads be careful not to spray grass onto the
carriageway, keep any persons at a distance of 15/20 metres.
The main features are its cutting quality and robust construction, it can also be fitted with a mulching kit.
Maintenance
1. Every 50 hours grease the blade pin bearings (fig. 35).
2. Check the belt tension every 50 hours and if necessary adjust it (A, fig. 36). The play on the belt must never
exceed 8/10 mm.
3. Blade maintenance:
a) Remove the split pins and side pins (fig. 37).
b) Release the universal joint from the deck by pressing on the button (fig. 38).
c) Lift the deck manually and attach it to the hook on the instrument panel (fig. 39).
d) Sharpen the blades or replace them if they show signs of wear. When lowering the deck again, carry out the
same procedure in reverse order, making sure to reconnect the universal joint.
e) Angle drive oil. Check the level every 40 hours, change it every 200 hours. Use synthetic oil 75 W 90 LSX
(international codes: API GL4 + GL5; API MT1 and PG2; MIL-L-2105D; MIL-PRF-2105E) (B, fig. 36) quantity - 0.15 lt.
Caution! Use an oil syringe for this operation.
110 CM MULCHING DECK (FIG. 40)
This is for cutting and mulching grass 10/12 cm high. This operation is best done with dry grass as the turbulence
inside the deck mulches it better.
It is advisable not to stop the machine after cutting but to continue for a few minutes over the already cut lawn to
discharge the grass from inside the deck.
It is attached in the same way as the other decks. Check the condition of the blades regularly, sharpen or replace
them if necessary.
Check the oil level in the transmission unit, change the oil every 300 hours, 0.6 lt. (75 W 90 SYNTHETIC).
This deck too has safety screws on the blades which shear off in the event of impact. They must be replaced with
interchangeable screws in mild steel.
In some European areas mulching involves two cuts; a first passage cuts 1/3 of the grass height and a second cutting
removes the remaining 2/3. Gauge which type of cut is most suited to your expectations and the type of grass.
110 CM GRASS SHREDDER (FIG. 41)
Very useful for clearing countryside with tall, wild grass. Allows the cut product to be shredded making collection unnecessary.
It comes equipped as standard with “Y” shaped hoes, also suitable for shredding small pruned branches. It can
be fitted with grass blades to give a cutting quality equal to that of the lawnmower, or converted into a scarifier by
changing the blades holding roller or by simply replacing the hoes with expulsion vanes.
Applied in the same way as the lawnmower, be careful to fit the universal joint onto the grooved shaft.
Check regularly the tension on the belts at the side of the grass shredder and grease the belt supports.
If the grass shredder vibrates, check the hoes.
Содержание
- Fd300 700 p.1
- Bee fly p.1
- Gebrauchs und wartungsanleitung p.1
- Use and maintenance uso e manutenzione emploi et maintenance p.1
- Uso y mantenimiento p.1
- Index indice contenu inhalt indice p.3
- Vorsicht nie laufendes kardangelenk anfassen da es gefährlich ist nie beim laufenden motor instandhaltung machen neigung vermeiden p.7
- Pericolo ribaltamento della macchina p.7
- Danger renversement de la machine p.7
- Beware never touch moving universal joint it can be very dangerous never maintenance making by running engine p.7
- Attenzione non toccare il giunto cardanico in rotazione crea gravi danni alla persona non fare manutenzione con il motore in moto p.7
- Attenzione p.7
- Attention ne jamais toucher le joint de cardan en mouvement il peut causer des dommages à la personne ne faire pas l entretien quand le moteur marche p.7
- Attention p.7
- Atención no tocar jamás junta cardan en movimento porque pueden crear graves daños a la persona no efectuar el mantenimiento con el motor en marcha p.7
- Achtung p.7
- Warning p.7
- Peligro volcado de la máquina p.7
- Peligro p.7
- Max 15 26 p.7
- Gefahr umstürzen der maschine p.7
- Danger machine rollover p.7
- 150 cm 59 side discharge cutting deck piatto rasaerba scarico laterale cm 150 disque tondeuse de 150 cm a evacuation laterale 150 cm rasenmäher mit seitlichenauswurf plato cortacésped con descarga lateral cm 150 p.9
- Grasso grease p.10
- Attenzione occorre ingrassare tutte le parti segnalate da questo simbolo p.10
- Attention you have to grease all parts pointed out by the symbol p.10
- Attention graisser tous les éléments indiqués par ce symbole p.10
- Atención hay que engrasar todas las partes indicadas con el siguiente símbolo p.10
- Achtung alle mit diesem symbol markierten stellen müssen mit fett geschmiert werden p.10
- Hydrostatic lawnmower fd 300 700 p.11
- Warnings p.11
- Caution read carefully before turning the motor on the following warnings are important for operator safety p.11
- Spare parts p.12
- Recommended spare parts to be kept on hand p.12
- Identification and servicing p.12
- How to order spare parts p.12
- Warranty p.12
- Servicing p.12
- Identification p.12
- Running in caution p.13
- Technical specifications p.13
- Putting the machine into service p.13
- Instructions for use p.13
- Battery caution p.13
- Guidelines for effective use p.14
- Starting work p.14
- Starting the petrol engine p.14
- Starting the diesel engine p.14
- Reduction gears on wheel p.15
- Maintenance and lubrication p.15
- Lubrication p.15
- Sloping ground p.15
- Safety device triggering p.15
- Mowing position p.15
- Engine p.15
- Hydraulic motors p.16
- Sharpening the blades p.16
- Agip synthetic lsx 75 w 90 api gl4 gl5 api mt1 and pg2 0 5 lt change every 200 hours use an oil suction syringe for this operation fig 16 p.16
- Adjusting the cutting deck p.16
- Pto belts p.17
- Hydrostatic motor belts p.17
- Engine pto transmission belt p.17
- Troubleshooting guide p.17
- Machine will not keep a straight line p.19
- Electrical circuit p.19
- Mechanical parking brake p.19
- Impact with a stone or some other foreign object p.19
- How to increase the traction power of the wheels p.19
- Finishing work p.19
- Storage and lack of use for long periods p.20
- Cm side discharge cutting deck p.20
- Cm mulching deck fig 40 p.20
- Cm grass shredder fig 41 p.20
- Cleaning p.20
- Accessories p.20
- Low pressure wheels 21 x 11 0 8 fig 44 p.21
- Front blade fig 42 p.21
- Roller brush fig 43 p.21
- Rasaerba idrostatico fd 300 700 p.22
- Avvertenze p.22
- Attenzione leggere attentamente prima di avviare il motore le seguenti avver tenze sono importanti per l incolumità dell operatore p.22
- Come ordinare i ricambi p.23
- Servizio assistenza p.23
- Ricambi che si consigliano di tenere di scorta p.23
- Ricambi p.23
- Identificazione e assistenza p.23
- Identificazione p.23
- Garanzia p.23
- Rodaggio attenzione p.24
- Messa in opera della macchina p.24
- Istruzioni d uso p.24
- Caratteristiche tecniche p.24
- Batteria attenzione p.24
- Regole utili per il buon uso p.25
- Inizio del lavoro p.25
- Avviamento del motore diesel p.25
- Avviamento del motore a benzina p.25
- Riduttori ruote p.26
- Manutenzione e lubrificazione p.26
- Terreni in pendenza p.26
- Posizioni di taglio p.26
- Motore p.26
- Lubrificazione p.26
- Interventi dei dispositivi di sicurezza p.26
- Regolazione piatto di taglio p.27
- Motori idraulici p.27
- Affilatura delle lame p.27
- Cinghia motore rinvio pto p.28
- Cinghie motori idrostatici p.28
- Guida alla identificazione degli inconvenienti p.28
- Cinghie pto p.28
- Come aumentare la potenza di trazione delle ruote p.30
- Si urta una pietra o un altro corpo estraneo p.30
- La macchina non mantiene la direzione p.30
- Impianto elettrico p.30
- Freno di stazionamento meccanico p.30
- Fine lavoro p.30
- Trinciaerba cm 110 fig 41 p.31
- Rimessaggio e inattività prolungata p.31
- Pulizia p.31
- Piatto rasaerba cm 150 scarico laterale p.31
- Piatto cm 110 mulching fig 40 p.31
- Accessori p.31
- Ruote a bassa pressione 21 x 11 0 8 fig 44 p.32
- Lama apripista fig 42 p.32
- Spazzolatrice a rullo fig 43 p.32
- Tondeuse hydrostatique grillo fd 300 700 p.33
- Mises en garde p.33
- Attention lire attentivement les instructions avant d activer le moteur les précautions suivantes sont importantes pour la sécurité de l opérateur p.33
- Service assistance p.34
- Pieces detachees que nous conseillons d avoir en reserve p.34
- Pieces detachees p.34
- Modalites de commande des pieces detachees p.34
- Identification et assistance p.34
- Identification p.34
- Garantie p.34
- Mise en service de la tondeuse p.35
- Rodage attention p.35
- Mode d emploi p.35
- Caracteristiques techniques p.35
- Batterie attention p.35
- Regles utiles pour un bon usage p.36
- Demarrage du moteur diesel p.36
- Demarrage du moteur a essence p.36
- Debut des travaux p.36
- Terrains en pente p.37
- Reducteurs de roues p.37
- Positions de coupe p.37
- Moteur p.37
- Interventions des dispositifs de securite p.37
- Graissage p.37
- Entretien et lubrification p.37
- Moteurs hydrauliques p.38
- Affutage des lames p.38
- Courroies prise de force p.39
- Courroies moteurs hydrostatiques p.39
- Courroie moteur renvoi prise de force p.39
- Reglage du plateau de coupe p.39
- Identification des inconvenients p.39
- La tondeuse ne maintient pas la direction voulue p.41
- Frein de stationnement mecanique p.41
- Comment augmenter la puissance de traction des roues p.41
- Choc contre une pierre ou tout autre element p.41
- Tondeuse 150 cm a evacuation laterale p.42
- Tondeuse 110 cm mulching fig 40 p.42
- Nettoyage p.42
- Mise en depot et inactivite prolongee p.42
- Installation electrique p.42
- Fin de la tonte p.42
- Accessoires p.42
- Lame ouvre piste fig 42 p.43
- Hacheuse 110 cm fig 41 p.43
- Brosseuse a rouleau fig 43 p.43
- Roues a basse pression 21 x 11 0 8 fig 44 p.43
- Sicherheitsrelevante hinweise p.44
- Hydrostatischer grossflächenmäher fd 300 700 p.44
- Achtung lesen sie vor dem anlassen des motors die folgenden hinweise zum schutz ihrer persönlichen sicherheit genau durch p.44
- Kundendienst p.45
- Identifikation der maschine und kundendienst p.45
- Identifikation p.45
- Garantie p.45
- Ersatzteilebestellung p.45
- Ersatzteile die sie immer vorrätig haben sollten p.45
- Ersatzteile p.45
- Technische daten produktbeschreibung p.46
- Inbetriebnahme der maschine p.46
- Einfahren achtung p.46
- Betriebsanleitung p.46
- Batterie achtung p.46
- Nützliche tipps zum gebrauch der maschine p.47
- Beginn der arbeit p.47
- Anlassen des dieselmotors p.47
- Anlassen des benzinmotors p.47
- Wartung und schmierung p.48
- Schmierung p.48
- Mähen auf hängen p.48
- Einstellen der schnitthöhe p.48
- Ansprechen der sicherheitseinrichtungen p.48
- Radgetriebe p.49
- Nachschleifen der messer p.49
- Hydromotoren p.49
- Riemen motor getriebe zapfwelle p.50
- Riemen der hydromotoren p.50
- Liste der häufigsten störungen und deren behebung p.50
- Einstellen des rasenmähers p.50
- Zapfwellenriemen p.50
- Die maschine hält die richtung nicht p.52
- Sie sind gegen einen stein oder einen anderen fremdkörper gefahren p.52
- Mechanische feststellbremse handbremse p.52
- Erhöhen der zugkraft der räder p.52
- Zubehöre p.53
- Reinigung p.53
- Nach dem mähen p.53
- Elektrische anlage p.53
- Einstellen des mähers und längere nichtbenutzung p.53
- Cm rasenmäher mit seitlichenauswurf p.53
- Schlegelmäher 110 cm abb 41 p.54
- Planierschild abb 42 p.54
- Niederdruckreifen 21 x 11 0 8 abb 44 p.54
- Kehrmaschine mit rolle abb 43 p.54
- Cm rasenmäher mulching abb 40 p.54
- Cortacésped hidrostático grillo fd 300 700 p.55
- Atención lea atentamente antes de poner en marcha el motor las siguientes advertencias son importantes para la incolumidad del operador p.55
- Advertencias p.55
- Servicio de asistencia p.56
- Recambios que se aconseja tener de reserva p.56
- Recambios p.56
- Identificación y asistencia p.56
- Identificación p.56
- Garantía p.56
- Como pedir los recambios p.56
- Instrucciones para el uso p.57
- Rodaje atención p.57
- Puesta en servicio de la máquina p.57
- Características técnicas p.57
- Batería atención p.57
- Arranque del motor a gasolina p.58
- Reglas útiles para un buen uso p.58
- Inicio del trabajo p.58
- Arranque del motor diesel p.58
- Terrenos en pendiente p.59
- Posiciones de corte p.59
- Mantenimiento y lubrificación p.59
- Lubrificación p.59
- Acciones de los dispositivos de seguridad p.59
- Motores hidráulicos p.60
- Reductores ruedas p.60
- Afilado de las cuchillas p.60
- Regulación plato de corte p.61
- Guía para identificar los inconvenientes p.61
- Correas toma de fuerza pto p.61
- Correas motores hidrostáticos p.61
- Correa motor transmisión toma de fuerza pto p.61
- La máquina no mantiene la dirección p.63
- Freno de estacionamiento mecánico p.63
- Cómo aumentar la potencia de tracción de las ruedas p.63
- Choque con una piedra u otro cuerpo extraño p.63
- Plato cortacésped 150 cm descarga lateral p.64
- Parque e inactividad prolongada p.64
- Limpieza p.64
- Instalación eléctrica p.64
- Fin del trabajo p.64
- Accesorios p.64
- Barredora de rodillo fig 43 p.65
- Ruedas de baja presión 21 x 11 0 8 fig 44 p.65
- Plato 110 cm mulching fig 40 p.65
- Pala frontal fig 42 p.65
- Desbrozadora 110 cm fig 41 p.65
- Grillo fd300 700 diesel benzina p.66
- Grillo fd300 700 diesel benzina p.67
Похожие устройства
-
Grillo FX 27Инструкция по эксплуатации -
Grillo KINGИнструкция по эксплуатации -
Grillo BEEFLY LИнструкция по эксплуатации -
Grillo BEEFLY FD 300 DИнструкция по эксплуатации
-
Grillo BEEFLY 700Инструкция по эксплуатации
-
Grillo FD1000 - DRAGONИнструкция по эксплуатации -
Grillo FX 20Инструкция по эксплуатации -
Husqvarna TC138Руководство по эксплуатации -
Cub Cadet CC 1018 AGИнструкция по эксплуатации -
Cub Cadet GT1223Инструкция по эксплуатации
-
Cub Cadet CC 713 TAИнструкция по эксплуатации
-
Cub Cadet GT1224Инструкция по эксплуатации
Узнайте, как правильно чистить и хранить газонокосилки, а также поддерживать их в идеальном состоянии для долгосрочной эксплуатации. Полезные советы по обслуживанию.