![Icom IC-M802 [37/78] The transceiver is set to the traffic frequency after the call transmission push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired](/img/pdf.png)
Icom IC-M802 [37/78] The transceiver is set to the traffic frequency after the call transmission push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired
![Icom IC-M802 [37/78] The transceiver is set to the traffic frequency after the call transmission push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired](/views2/1074299/page37/bg25.png)
29
7
CALL PROCEDURE
7
2001 NEW
DD
Safety call operation
A safety call procedure is almost the same as the ur-
gency call.
q Push [MODE
SET
] to select the DSC menu.
w Rotate [CH] to select the desired DSC format from
“Individual” and “All ships,” then push
[ENT].
• When selecting “All ships”
e Rotate [CH] to select “Urgency,” then push
[ENT].
r Rotate [CH] to select a traffic frequency from one
of the pre-programmed frequencies or “Manual
set” then push [ENT].
✔ When a pre-programmed frequency is selected,
go to step y.
t Enter the desired traffic frequencies for both the
transmit and receive, then push [ENT].
y Rotate [CH] to select the desired calling channel,
then push [ENT].
u After the calling stand-by screen appears, push
and hold [CANCEL/CALL] for 1 sec. to transmit the
safety call.
•The transceiver is set to the traffic frequency after the
call transmission.
•Push and hold [ENT] for 1 sec. to store the calling con-
dition into the TX memory described in pages 23 and
43, if desired.
i Announce the following message.
•“SECURITE” (repeat 3 times)
•“All stations” (repeated 3 times).
•“This is ..... (your ship name).”
•The 9-digit identity AND the call sign (or
other identification of the ship)
•The text of the safety message.
******
All
ships
*******
---------
Call
---------
Category:Safety
Traffic:J3E
TX
2134.0kHz
RX
2134.0kHz
Call
Freq:TX
2187.5kHz
RX
2187.5kHz
Write-Menu
Call
******
All
ships
*******
----
Call
frequency
----
2187.5kHz
4207.5kHz
6312.0kHz
8414.5kHz
12577.0kHz
16804.5kHz
Ç
OKSEL
******
All
ships
*******
--
Traffic
frequency
---
TX:_2134.0kHz
RX:_2134.0kHz
OKSEL
******
All
ships
*******
--
Traffic
frequency
---
Manual
set
T:
4567.0kHz
IC-M802-1
R:
4567.0kHz
T:12345.0kHz
IC-M802-2
R:12345.0kHz
Ç
OKSEL
******
All
ships
*******
-------
Category
-------
Safety
Urgency
Ç
OKSEL
IC-M802_USA.qxd 02.5.30 11:40 Page 29
Содержание
- Instruction manual 1
- Mf hf marine transceiver 1
- Built in dsc meets itu class e requirement 2
- D features 2
- E mail function available 2
- Explicit definitions 2
- Foreword 2
- Important 2
- Pc connection capability for remote control 2
- Precautions 2
- R neve 2
- R warning high voltage neve 2
- R warning neve 2
- Read this instruction manual carefull 2
- Save this instruction manual 2
- Standard 4 8 remote controller 2
- Channel name programming 14 3
- Dsc equipped ships may monitor your transmission 3
- E follow the guidance displayed on the lcd bottom line to set up the category traffic frequency and calling frequency with ch ent and keypad 3
- Explain what assistance you need 3
- Give additional information ship type ship length ship color number of people on board 3
- Give the reason for the distress call 3
- In case of emergency 3
- Located at ship s position 3
- May day may day may day 3
- Q push and hold distress for 5 sec until the short beeps become one long beep to send the distress call 3
- Q push dsc to select dsc watch mode if neces sary 3
- Quick reference 3
- R push and hold cancel call for 1 sec until the short beeps become one long beep 3
- T after an acknowledgement call is received trans mit the appropriate information using voice 3
- Table of contents 3
- This is name of ship 3
- To select dsc menu rotate ch to select all ships then push ent 3
- W after 2182 khz is automatically selected after an acknowledgement call is received push and hold the ptt switch on the microphone and send the following information 3
- W push mod 3
- When immediate help is needed 3
- When potential problems exist 3
- When your ship requires assistance contact other ships and the coast guard by sending a distress call using digital selective calling on 2187 khz 3
- Available channel groups and channels 4
- D using the group and channel selectors 4
- D using the keypad 4
- Example when selecting ch 1 push 4
- Example when selecting ch 25 2 push 4
- Example when selecting ch 4 1 push 4
- Example when selecting ch 401 push 4
- I how to set a channel group 4
- Q rotate grp to select the desired group 4
- Quick reference 4
- The ic m802 has up to 160 user programmable 242 itu ssb duplex 72 itu ssb simplex and 662 itu fsk duplex channels 4
- Then push ent 4
- Then push ent example when selecting ch 128 push 4
- Then push ent example when selecting ch 2505 push 4
- Then push ent example when selecting ch 35 push 4
- W rotate ch to select the desired channel 4
- When selecting an itu duplex channel push the appropriate numeral keys to set the 3 4 or 5 digit channel number then push ent 4
- When selecting an itu simplex channel push the appropriate numeral keys to set the 5 or 6 digit channel number then push ent 4
- When selecting an user programmable channel push the appropriate numeral keys to set the 1 2 or 3 digit channel number then push ent 4
- D audio output level 5
- D squelch function 5
- I audio output squelch adjustment 5
- Quick reference 5
- D receiving a signal 6
- D transmitting in voice 6
- I basic voice transmission and reception 6
- D simple distress call 7
- I receiving a dsc 7
- I transmitting a distress call 7
- Quick reference 7
- D regular distress call 8
- E rotate ch to select distress then push ent 8
- Q push dsc to enter dsc watch mode 8
- Quick reference 8
- R rotate ch to select the desired nature then push ent 8
- T verify your position and the utc time then push ent 8
- To enter dsc menu 8
- U lift up the distress switch cover then push and hold distress for 5 sec 8
- W push mod 8
- Y rotate ch to select the dsc calling frequencies then push ent 8
- Operating rules and guidelines 9
- Quick reference 9
- I front panel controller 10
- Panel description 10
- I front panel main unit 12
- I microphone hm 135 13
- I rear panel main unit 13
- D display selection 16
- D using the channel selector 16
- Grp changes in 20 channels steps 16
- I selecting a channel 16
- Ic m802_usa qxd 02 0 11 39 page 8 16
- Selecting a channel frequency 16
- Sitor use no group separation 16
- Ch 159 ch 160 17
- Channel scan and channel resume scan increase channels within a 20 channel range such as ch 1 to ch 20 ch 141 to ch 160 etc in user channels or all channels in the group of itu channels programmed scan scans frequencies within the fre quency range between user channels 159 and 160 scan type selection is available in initial set mode see p 50 for the selection 17
- D using scan function 17
- D using the keypad 17
- Direct channel selection via the keypad is available for quick channel selection q enter the desired channel number via the keypad 17
- Example selecting channel 158 17
- Scan operation q rotate grp and ch or use the keypad to se lect your desired channel group 17
- Selecting a channel frequency 17
- The transceiver has automatic channel or frequency change capability scan function there are 3 types of scan functions available to suit your needs 17
- To start the scan r to stop the scan repeat step e again 17
- To turn off the squelch function if programmed scan is selected e push f then 17
- W push ent to select the channel 17
- W push f then 17
- I basic voice transmit and receive 18
- I functions for transmit 18
- Receive and transmit 18
- I functions for receive 19
- I cw operation 20
- I functions for receive continued 20
- I fsk operation 21
- Channel name programming 22
- Dsc preparation 23
- I mmsi code programming 23
- Ic m802_usa qxd 02 0 11 39 page 15 23
- 0 push mod 24
- Dsc preparation 24
- E rotate grp to select the offset time then rotate ch to set the time difference between local and the utc times within 12 to 12 hours in 10 minute steps 24
- I enter your position and the utc time via the key pad then push ent 24
- I position and time programming 24
- Ic m802_usa qxd 02 0 11 39 page 16 24
- Important the manually programmed position and the utc time settings will be cleared once the power is turned off they are never renewed during the voyage when the position is set manually 24
- O push ent to program the position and time 24
- Push power to enter initial set mode 24
- Q while pushing and holding mod 24
- R turn the power off once then on again to exit quick set mode 24
- T push dsc to select dsc watch mode y push mod 24
- To enter the dsc menu 24
- To exit the dsc menu 24
- U rotate ch to select position then push ent 24
- W rotate grp to select the gps display then rotate ch to select the desired position indication type from simple and detail 24
- When a position and the utc time data nmea0183 ver 3 1 format is applied to gps the following steps are not necessary 24
- When no position and the utc universal time coor dinated time data in nmea0183 ver 3 1 format such as from a gps receiver etc is applied to gps con nector your position and the utc time should be input for dsc operation 24
- Call procedure 25
- Dsc menu distress nature selection position utc time setting 25
- Frequency selection 25
- I distress call 25
- Ic m802_usa qxd 02 0 11 39 page 17 25
- Push and hold distress for 5 sec 25
- After 5 sec starts distress call 26
- Call procedure 26
- D simple distress call 26
- E after transmitting the call the transceiver is set to the phone emergency frequency automatically e g 2182 khz 26
- Ic m802_usa qxd 02 0 11 39 page 18 26
- New 2001 new 26
- Note distress alert simple operation contains default distress nature undesignated distress position data according to the displayed infor mation distress call repeats every 3 4 min until re ceiving an acknowledgement beep pi pi sounds with the maximum audio level every 1 sec 26
- Push and hold distress for 5 sec to transmit a renewed distress call if desired push cancel call to cancel the call repeat mode the cancel acknowledgement is automatically transmitted when the cancel call is pushed 26
- Q confirm a distress call is not being received w lift up the distress switch cover push distress for 5 sec to transmit the distress call 26
- R when receiving an acknowledgement push can cel call to stop the alarm then reply to the con nected station via the transceiver s microphone 26
- T activate an epirb emergency position indicating radio beacon and prepare a sart search and rescue transponder and vhf marine handheld transceiver before launching a survival craft 26
- Call procedure 27
- D regular distress call 27
- E rotate ch to select distress then push ent 27
- I after transmitting the call the transceiver is set to the phone emergency frequency automatically 27
- Ic m802_usa qxd 02 0 11 39 page 19 27
- O when receiving an acknowledgement push can cel call to stop the alarm then reply to the con nected station via the transceiver s microphone 27
- Q push dsc to select dsc watch mode w push mode set to select the dsc menu 27
- R rotate ch to select the desired nature then push ent 27
- T verify the position and utc time data then push ent 27
- Transmit a distress call after selecting distress in the dsc menu never use the distress call when your ship is not in an emergency distress calls can be used only when immediate help is needed 27
- U lift up the distress switch cover push distress for 5 sec to transmit the distress call 27
- Y rotate ch to select the desired distress fre quency then push ent 27
- After receiving an acknowledgement call 28
- Any other information which might facili tate the rescue 28
- D when no acknowledgement is received 28
- Mayday 28
- The 9 digit identity and the call sign or other identification of the ship 28
- The nature of the distress and assistance required 28
- The ship s position if the dsc distress does not included it 28
- This is your ship name 28
- Call procedure 29
- Call stand by screen 29
- D operation outline 29
- Dsc menu category selection 29
- General dsc call with the distress category may be used for communications after the distress call e g you want to change the operating mode frequency etc 29
- I distress call to ships 29
- Ic m802_usa qxd 02 0 11 39 page 21 29
- Manual id input 1st telecommand selection address id selection 29
- Push cancel call for 1 sec to start calling push ent for 1 sec to store the condition into a tx memory chan nel 29
- The call is transmitted one time only although the dis tress call using the distress switch sends 5 times repeatedly 29
- Traffic frequency selection 1 traffic frequency selection 2 call frequency selection 29
- 0 rotate ch to select the desired calling frequency then push ent 30
- 1 the call stand by screen is displayed as follows verify the calling condition then push and hold cancel call for 1 sec to start calling 30
- 2 after the call wait for an acknowledgement call 30
- Call procedure 30
- D operation for distress call to ships 30
- E rotate ch to select individual then push ent r rotate ch to select distress then push ent 30
- Ent dsc 30
- Enter the desired 9 digit mmsi code via the keypad 30
- Freq ch ch f cancel call 30
- I rotate ch to select the desired pre programmed traffic frequency or manual set then push ent when pre programmed traffic frequency is se lected go to step 0 30
- Ic m802_usa qxd 02 0 11 39 page 22 30
- New 2001 new 30
- O enter the desired transmit and receive traffic fre quency via the keypad then push ent 30
- Q push dsc to select dsc watch mode w push mode 30
- T rotate ch to select the desired pre programmed id or manual set then push ent when pre programmed id is selected go to step u 30
- The calling is performed one time only 30
- The number 0 zero cannot be entered for the 1st digit as the 1st digit 0 means group code 30
- To select the dsc menu 30
- U rotate ch to select 1st telecommand then push ent when no information is selected go to step 0 30
- 3 when receiving the acknowledgement call the dis play shows the received id code or the called sta tion name 31
- Call procedure 31
- Convenient the ic m802 has dsc tx memory you can store often used dsc calling conditions for quick and sim ple re call up to 10 conditions can be stored into the memory with the following instructions 31
- Ic m802_usa qxd 02 0 11 39 page 23 31
- Push and hold cancel call for 1 sec when transmitting the dsc call in set condition or push mod 31
- Push and hold ent for 1 sec again to store the condition into the selected memory channel 31
- Push ent to return to the calling stand by condi tion 31
- Push freq ch to select the traffic frequency if the called station is able to comply to the call to return to dsc watch mode when unable 31
- When call stand by screen is displayed as in step 1 at left push and hold ent for 1 sec rotate ch to select the desired tx memory chan nel number 31
- When returning to dsc watch mode 31
- When the called station is unable to comply to the call the reason may be displayed 31
- An urgency call is sometimes called a pan pan call 32
- Call procedure 32
- D operation outline 32
- I urgency call 32
- Ic m802_usa qxd 02 0 11 39 page 24 32
- When you want to send an urgency message such as medical transport announcement etc to other ships use urgency as the category 32
- All stations repeated 3 times 33
- Call procedure 33
- D urgency call operation 33
- E rotate ch to select urgency then push ent 33
- I announce the following message 33
- Ic m802_usa qxd 02 0 11 39 page 25 33
- Pan pan 33
- Q push mode 33
- R rotate ch to select a traffic frequency from one of the pre programmed frequencies or manual set then push ent when a pre programmed frequency is selected go to step y 33
- T enter the desired traffic frequencies for both the transmit and receive then push ent 33
- The 9 digit identity and the call sign or other identification of the ship 33
- The text of the urgency message 33
- The transceiver is set to the traffic frequency after the call transmission push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired 33
- This is your ship name 33
- To select the dsc menu w rotate ch to select either individual or all ships then push ent 33
- U after the calling stand by screen appears push and hold cancel call for 1 sec to transmit the urgency call 33
- When selecting all ships 33
- Y rotate ch to select the desired calling channel then push ent 33
- 0 after sending the call the transceiver waits for an acknowledgement 34
- Call procedure 34
- E select urgency as the category using ch then push ent 34
- I rotate ch to select the desired calling frequency then push ent 34
- Ic m802_usa qxd 02 0 11 40 page 26 34
- O the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the call 34
- R select or enter the 9 digit id code then push ent 34
- T rotate ch to select 1st telecommand then push ent when no information is selected go to step i 34
- U enter the desired transmit and receive traffic fre quency via the keypad then push ent 34
- When selecting individual 34
- Y rotate ch to select the desired pre programmed traffic frequency or manual set then push ent when pre programmed traffic frequency is se lected go to step i 34
- 1 when receiving an acknowledgement the display shows the received id code or the called station name 35
- 2 announce the following message to the connected station 35
- Call procedure 35
- Desired station name repeated 3 times 35
- Ic m802_usa qxd 02 0 11 40 page 27 35
- Pan pan 35
- Push freq ch to select the traffic frequency if the called station is able to comply to the call to return to dsc watch mode when unable 35
- The 9 digit identity and the call sign or other identification of the ship 35
- The text of the urgency message 35
- This is your ship name 35
- When the called station is unable to comply to the call the reason may be displayed 35
- A safety call is sometimes called a securite call 36
- Call procedure 36
- D operation outline 36
- I safety call 36
- Ic m802_usa qxd 02 0 11 40 page 28 36
- New 2001 new 36
- When you want to send a safety message to other ships use safety as the category 36
- A safety call procedure is almost the same as the ur gency call 37
- All stations repeated 3 times 37
- Call procedure 37
- D safety call operation 37
- E rotate ch to select urgency then push ent 37
- I announce the following message 37
- Ic m802_usa qxd 02 0 11 40 page 29 37
- Q push mod 37
- R rotate ch to select a traffic frequency from one of the pre programmed frequencies or manual set then push ent when a pre programmed frequency is selected go to step y 37
- Securite repeat 3 times 37
- T enter the desired traffic frequencies for both the transmit and receive then push ent 37
- The 9 digit identity and the call sign or other identification of the ship 37
- The text of the safety message 37
- The transceiver is set to the traffic frequency after the call transmission push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired 37
- This is your ship name 37
- To select the dsc menu w rotate ch to select the desired dsc format from individual and all ships then push ent 37
- U after the calling stand by screen appears push and hold cancel call for 1 sec to transmit the safety call 37
- When selecting all ships 37
- Y rotate ch to select the desired calling channel then push ent 37
- 0 after sending the call the transceiver waits for an acknowledgement 38
- Call procedure 38
- E select safety as the category using ch then push ent 38
- I rotate ch to select the desired calling frequency then push ent 38
- Ic m802_usa qxd 02 0 11 40 page 30 38
- New 2001 new 38
- O the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the call 38
- R select the desired 9 digit id code then push ent 38
- T rotate ch to select 1st telecommand then push ent when no information is selected go to step i 38
- U enter the desired transmit and receive traffic fre quency via the keypad then push ent 38
- When selecting individual 38
- Y rotate ch to select the desired pre programmed traffic frequency or manual set then push ent when the pre programmed traffic frequency is selected go to step i 38
- 1 when receiving an acknowledgement the display shows the received id code or the called station name 39
- 2 announce the following message to the connected station 39
- Call procedure 39
- Desired station name or all stations repeated 3 times 39
- Ic m802_usa qxd 02 0 11 40 page 31 39
- Push freq ch to select the traffic frequency if the called station is able to comply to the call to return to dsc watch mode when unable 39
- Securite repeat 3 times 39
- The 9 digit identity and the call sign or other identification of the ship 39
- The text of the safety message 39
- This is your ship name 39
- When the called station is unable to comply to the call the reason may be displayed 39
- Call procedure 40
- I rotate ch to select the desired pre programmed calling frequency or manual set then push ent when the pre programmed call frequency is se lected go to step 0 40
- I routine call 40
- New 2001 new 40
- O enter the desired transmit and receive call fre quency via the keypad then push ent 40
- Q push mod 40
- R select the desired 9 digit id code then push ent 40
- T rotate ch to select 1st telecommand then push ent when no information is selected go to step i 40
- To select the dsc menu w rotate ch to select individual then push ent e select routine as the category using ch then push ent 40
- U enter the desired transmit and receive traffic fre quency via the keypad then push ent 40
- When you use dsc for general selective calling use routine as the category 40
- Y rotate ch to select the desired pre programmed traffic frequency or manual set then push ent when pre programmed traffic frequency is se lected go to step i 40
- 0 the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the rou tine call 41
- 1 after sending the call the transceiver waits for an acknowledgement 41
- 2 when receiving an acknowledgement the display shows the received id code or the called station name 41
- 3 announce the following message to stations the 9 digit identity or call sign or other identifi cation of the station which you want to call this is your ship name the 9 digit identity or call sign or other identifi cation of the ship 41
- Call procedure 41
- Ic m802_usa qxd 02 0 11 40 page 33 41
- Push and hold ent for 1 sec to store the calling con dition into the tx memory described in pages 23 and 43 if desired 41
- Push freq ch to select the traffic frequency if the called station is able to comply to the call to return to dsc watch mode when unable 41
- When no acknowledgement is received q wait for 5 min then call again on the same or a different frequency w if no acknowledgement is received after a 2nd call wait for at least 15 min before repeating the call 41
- When the called station is unable to comply to the call the reason may be displayed 41
- 0 announce the following message to stations the group name this is your ship name the 9 digit identity or call sign or other identifi cation of the ship 42
- Call procedure 42
- I group call 42
- I the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the group call 42
- Ic m802_usa qxd 02 0 11 40 page 34 42
- New 2001 new 42
- O after sending the call the traffic frequency is se lected automatically 42
- One of the voice channel such as tx rx 2082 khz 4146 khz should be used 42
- Push and hold ent for 1 sec to store the calling con dition into tx memory described in pages 23 and 43 if desired 42
- Q push mod 42
- R rotate ch to select the desired pre programmed traffic frequency or manual set then push ent when the pre programmed traffic frequency is selected go to step y 42
- T enter the desired transmit and receive traffic fre quency via the keypad then push ent 42
- To select the dsc menu w rotate ch to select group then push ent e select the desired 9 digit group code then push ent 42
- U enter the desired transmit and receive call fre quency via the keypad then push ent 42
- Use ch to select the group code when the desired group is pre programmed 42
- When manual set is selected enter the desired code last 8 digits only via the keypad the first digit 0 zero is fixed for group code 42
- When you use dsc for calling the desired ship s group use group menu 42
- Y rotate ch to select the desired pre programmed calling frequency or manual set then push ent when the pre programmed call frequency is se lected go to step i 42
- 2177 khz should be used for ship to ship calls 43
- Call procedure 43
- I position request call 43
- I when receiving the acknowledgement the display shows the ship s position as follows 43
- Ic m802_usa qxd 02 0 11 40 page 35 43
- Note the seconds digits may not be displayed ac cording to the called station s system 43
- O push ent to return to dsc watch mode 43
- Push and hold ent for 1 sec to store the calling con dition into the tx memory as described in pages 23 and 43 if desired 43
- Q push mod 43
- R rotate ch to select the desired pre programmed calling frequency or manual set then push ent 43
- Select manual set with ch then push ent after that enter the desired 9 digit id the via keypad 43
- T enter the desired transmit and receive call fre quency via the keypad then push ent 43
- The position request call is used to confirm the speci fied ship s position this calling system uses digital sig nals only therefore a voice reply is not necessary 43
- To select the dsc menu w rotate ch to select the position req then push ent e select the desired 9 digit id code then push ent 43
- U after sending the call the transceiver waits for the acknowledgement 43
- Use ch to select the id code when the desired ship s id is pre programmed 43
- When no acknowledgement is received q wait for 5 min then call again on the same or a different frequency w if no acknowledgement is received after a 2nd call wait for at least 15 min before repeating the call 43
- When the pre programmed traffic frequency is selected go to step y 43
- Y the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the po sition request call 43
- Call procedure 44
- I test call 44
- Ic m802_usa qxd 02 0 11 40 page 36 44
- Normally the test call would require no further commu nications between the two stations involved 44
- Q push mod 44
- R select the desired call frequency then push ent 44
- T the calling stand by screen is displayed as fol lows verify the calling condition then push and hold cancel call for 1 sec to transmit the test call 44
- Testing on the exclusive dsc distress and safety call ing frequencies such as 2187 khz should be avoided as much as possible by using other methods when testing on the distress safety frequency is un avoidable it should be indicated that these are test transmissions 44
- To select the dsc menu w rotate ch to select test call then push ent e select the desired coast station code then push ent 44
- U when receiving an acknowledgement the display shows the received id code or id name if pro grammed 44
- Use ch to select one of the desired distress safety frequencies 44
- Use ch to select the coast station code when pre pro grammed 44
- When manual set is selected enter the desired code last 7 digits only via keypad the first 2 digits 00 double zero are fixed for the coast station code 44
- When manual set is selected enter the desired transmit and receive frequencies via the keypad 44
- Y after sending a call the transceiver waits for an ac knowledgement 44
- I to receive a dsc call 45
- Ic m802_usa qxd 02 0 11 40 page 37 45
- When receiving a call 45
- E rotate ch to select the desired dsc message 46
- I deleting a memory 46
- I received information 46
- Ic m802_usa qxd 02 0 11 40 page 38 46
- New 2001 new 46
- Q during dsc watch mode push r 46
- R push ent to indicate the contents 46
- T push mod 46
- To enter the received dsc memory select screen 46
- To return to dsc watch mode 46
- Up to 20 distress and up to 10 other categories of call can be memorized 46
- W rotate ch to select the desired category from distress and others then push ent 46
- When receiving a call 46
- When receiving a dsc call the received format spec ifier and its contents are memorized into the rx mem ory distress calls including other calls with a distress category are stored separately from other calls 46
- When the desired memory contents to be deleted are displayed as at right push and hold ce for 1 sec 46
- E push ent to set the transceiver to the distress phone frequency then monitor the communication from the coast station to the ship in distress 47
- I distress call 47
- I distress relay call 47
- Ic m802_usa qxd 02 0 11 40 page 39 47
- One distress call sequence is sent 5 times repeatedly within approx 30 sec the emergency alarm sounds at each reception 47
- Q when receiving a distress call an emergency alarm sounds and the display below appears 47
- Q when receiving a distress relay call an emergency alarm sounds and the display below appears 47
- R select the received distress call memory channel to check the position of the ship in distress push freq ch then r 47
- The received distress call memory is displayed at the top line with symbol when the ship is close to you communication should be monitored continuously the traffic frequency is monitored even when the mem ory contents is displayed 47
- The received distress relay call memory dtrs rly is displayed at the top line with symbol when the ship is close to you communication should be monitored continuously the traffic frequency is monitored even when the mem ory contents is displayed 47
- To select rx memory screen select distress with ch then push ent push ent again 47
- To select rx memory screen select others with ch then push ent push ent again 47
- W push cancel call to stop the alarm if desired 47
- W push cancel call to stop the alarm if desired e push ent to set the transceiver to the distress phone frequency then monitor the communication from the coast station to the ship in distress 47
- When receiving a call 47
- E communicate via the microphone with the ship when the calling ship requires such r push freq ch to return to dsc watch mode 48
- E communicate with the ship when the calling ship requires such r push freq ch when the call does not require any action on your part 48
- E push freq ch to return to dsc watch mode 48
- I all ships call 48
- I geographical area call 48
- I group call 48
- Ic m802_usa qxd 02 0 11 40 page 40 48
- New 2001 new 48
- Note the ic m802 will not function for the geo graphical call when your position is out of the specified area gps data is not connected to gps and you haven t input the position information manually 48
- Q when receiving a geographical area call and your position is in the specified area geographic is displayed as below 48
- Q when receiving an all ships call an emergency alarm may sound or beeps when the category is safety and all ships is displayed as below 48
- Q when receiving an group call beeps may sound and group is displayed as below 48
- W push ent to listen to the traffic frequency for an announcement from the calling ship mother ship in your group 48
- W push ent to listen to the traffic frequency for an announcement from the calling station 48
- W push ent to select the traffic frequency and lis ten for an announcement from the calling station 48
- When receiving a call 48
- Calling station s name appears when the same id is preprogrammed 49
- Ic m802_usa qxd 02 0 11 40 page 41 49
- Individual call 49
- Q when individual is displayed as above push ent to display the calling contents 49
- R when unable is selected in step e rotate ch to select the desired reason then push ent 49
- T push cancel call for 1 sec to transmit the in dividual acknowledgement 49
- The dsc watch mode when unable is se lected in step e 49
- The received call is selected in rx memory rotate ch to scroll text to see hidden lines informa tion 49
- W push ent for acknowledgement call preparation e rotate ch to select that you can comply to the call or not from able and unable then push ent when able is selected go to step t 49
- When able is selected in step e 49
- When receiving a call 49
- When receiving an individual call beeps may sound or the emergency alarm depending on the category and the display below appears 49
- When unable is selected in step e 49
- Y after the transmission the transceiver selects the specified traffic frequency when able is selected in step e 49
- You must send back an acknowledgement to the call ing station in such cases 49
- Calling station s name appears when the same id is preprogrammed 50
- E verify your position and time then push ent 50
- I position request call 50
- Ic m802_usa qxd 02 0 11 40 page 42 50
- Positio 50
- Q when position req is displayed as below push ent 50
- R push and hold cancel call 1 sec to transmit the position request acknowledgement 50
- Returns to dsc watch mode after the transmission au tomatically 50
- W push ent to display the call contents for ac knowledgement preparation 50
- When receiving a call 50
- When the position or time requires a change use the keypad and ch for settings ch moves the cursor 50
- I memory description 51
- I memory reading transmitting deleting 51
- I memory writing 51
- Ic m802_usa qxd 02 0 11 40 page 43 51
- Memory operation 51
- Or push mod 51
- Rotate ch to select tx memory then push ent also selects the transmit memory screen 51
- The set dsc format and calling station id name ap pear 51
- A total of 100 id codes can be programmed as ad dress id for ships and coast stations and group id for group stations a pair of frequencies both transmit and receive and id name are also programmed to gether with the id code which are used as call fre quencies when using the id code 52
- D setting procedures 52
- Dsc menu operation 52
- I general 52
- I id input 52
- Ic m802_usa qxd 02 0 11 40 page 44 52
- In addition the following settings operation are avail able in dsc setup menu manual position time setting p 16 self id mmsi code indication described in this sec tion 52
- Q during dsc menu indication rotate ch to select set up then push ent to select setup menu 52
- R push the numeral keys to input the desired 10 digit id name 9 digit code and both transmit and re ceive frequencies then push ent 52
- Returns to the address group id list screen automati cally 52
- Rotate ch to move the cursor when entering group code enter 0 zero for the first digit the frequencies entered should be within the marine frequency ranges as follows 1 2 999 mhz 4 4 999 mhz 6 6 999 mhz 8 8 999 mhz 12 13 999 mhz 16 17 999 mhz 18 19 999 mhz 22 22 999 mhz 25 27 000 mhz 52
- T push ent to program the contents into the ad dress or group id 52
- The address group id list screen is displayed 52
- The address group id setup screen is displayed 52
- The id list is displayed in alphabetical order for id name so ch rotation may be necessary for the pro grammed id confirmation 52
- The select screen is displayed as below 52
- Then push ent 52
- To return to dsc watch mode or push freq ch to return to the select screen 52
- Up to 100 id codes with frequency and name can be programmed in menu mode for easy recall during dsc call setting 52
- W rotate ch to select the address id or group id then push ent 52
- Y push mod 52
- A total of 50 frequency pairs can be programmed as call frequency traffic frequency or scan fre quency the frequency usage and frequency name are also programmed together with the frequency 53
- D setting procedures 53
- Dsc menu operation 53
- I frequency input 53
- Note up to 6 pairs of frequencies only can be as signed as a scan frequency they are scanned dur ing dsc watch mode only different from the dis tress safety frequencies 53
- Q during dsc menu indication rotate ch to select set up then push ent to select setup menu 53
- R push the numeral keys to input the desired 10 character frequency name and both transmit and receive frequencies then push ent 53
- T push ent to program the contents into a all traf fic or scan frequency 53
- Then push ent 53
- To return to dsc watch mode or push freq ch to return to the select screen 53
- W rotate ch to select the call frequency traffic frequency or scan frequency then push ent 53
- Y push mod 53
- Dsc menu operation 54
- During setup select menu indication rotate ch to select mmsi check then push ent to dis play the programmed mmsi id self id 54
- E operate as follows when reading the memory contents only push ent to return to the appropriate mem ory list screen 54
- I memory reading deleting 54
- I verifying self id 54
- Q during setup select menu indication rotate ch to select the desired memory item then push ent 54
- W rotate ch to select the desired memory then push ent 54
- When deleting the memory contents push and hold ce for 1 sec 54
- E mail operation 55
- I general 55
- I operation 55
- D entering quick set mode 56
- D quick set mode items 56
- Dimmer 56
- Filter selection 56
- I quick set mode 56
- Lcd contrast 56
- Noise blanker level 56
- Set mode 56
- Squelch level 56
- Automatic tune 57
- D entering set mode 57
- D initial set mode items 57
- External antenna tuner type 57
- Fsk itu channel selection 57
- I initial set mode 57
- Number of user channels 57
- Channel scan and channel resume scan searches 20 channels around a user selected channel or searches all itu channels in the band when an itu channel is selected default ch scan 58
- D initial set mode items continued scan type 58
- Display type 58
- F1b filter 58
- Fsk tone frequency 58
- J2b filter 58
- New 2001 new 58
- Programmed scan searches signals within the fre quency range and activates slowly while squelch is open and fast while squelch is closed 58
- Scan speed 58
- Select the if filter passband width for f1b mode op eration from normal and narrow 58
- Select the if filter passband width for j2b mode op eration from wide mid and narrow 58
- Set mode 58
- Several mark frequencies are used for fsk operation this item selects an fsk mark frequency for almost any fsk system from 1200 hz 1275 hz 1487 hz 1615 hz 2100 hz and 2125 hz default 1615hz 58
- The upper half of the display can be set to display a programmable channel name or a receive frequency according to your needs default ch name 58
- This item adjusts the scan speed rate at which chan nels are searched the scan speed can be set from 1 to 10 with 1 being the fastest and 10 being the slowest default 4 58
- This item selects one of the following scan functions 58
- Wide 1 khz narrow 500 hz default 58
- Wide 2 khz middle 1 khz narrow 500 hz default 58
- Cw break in function 59
- D initial set mode items continued fsk shift frequency 59
- Fsk polarity 59
- Microphone keys 59
- P key function 59
- Voice squelch 59
- D initial set mode items continued remote id 60
- Modulation input output selection 60
- Offset time 60
- Position indication type 60
- Remote connector interface 60
- Select the position indicating type from simple and de tail 60
- Set mode 60
- Set the offset time between the utc and local time within 12 00 to 12 00 in 10 minutes steps default 0 00 60
- Simple hides second digits default detail shows second digits 60
- This item selects the id for the transceiver from 1 to 99 default 08 60
- This item selects the input output terminal for signals to from an external unit such as an hf e mail modem tnc terminal node controller etc default af mod 60
- This item selects the interface format for remote connector default nmea 60
- Connection and installation 61
- I front panel connections 61
- I supplied accessories 61
- I rear panel connections 62
- I ground connection 63
- I power source 63
- I antenna 64
- R warning high voltage neve 64
- D mounting location 65
- I mounting 65
- R warning neve 65
- For your reference 66
- I using the optional mb 75 66
- Confection and installation 67
- I transceiver dimensions 67
- D internal fuse replacement 68
- D line fuse replacement 68
- I fuse replacement 68
- Acc pin pin name description specification 69
- Confection and installation 69
- Dc 13 v pin pin name description specification 69
- I connector information 69
- Microphone pin pin name description specification 69
- Tuner pin pin name description specification 69
- Af mod pin pin name description specification 70
- Confection and installation 70
- Gps pin pin name description 70
- I connector information continued 70
- Remote pin pin name description 70
- Antenna and grounding considerations 71
- Antennas tuners 71
- Non technically speaking 71
- The importance of grounding 71
- Antenna and grounding considerations 72
- Antenna ground principles technically speaking 72
- New 2001 new 72
- Surface area 72
- Antenna and grounding considerations 73
- Summary 73
- General 74
- Receiver 74
- Specifications 74
- Transmitter 74
- I remote controller rc 25 75
- Template 75
- I speaker sp 24 76
- Template 76
- Options 77
- 1 32 kamiminami hirano ku osaka 547 0003 japan 78
- A 6154h 1us q printed in japan 2002 icom inc 78
- Asia icom inc 78
- Beijing icom ltd 78
- Ic m802_usa qxd 02 0 11 40 page 72 78
- Icom america inc 78
- Icom australia pty ltd 78
- Icom canada 78
- Icom europe gmbh 78
- Icom france s a 78
- Icom new zealand 78
- Icom spain s l 78
- Icom uk ltd 78
Похожие устройства
- Iiyama ProLite PLT2451MTS-B1 Инструкция по эксплуатации
- Эван C15 Инструкция по эксплуатации
- Icom IC-M90 Инструкция по эксплуатации
- Acer V275HLbid Инструкция по эксплуатации
- Эван C18 Инструкция по эксплуатации
- Icom MA-500TR Инструкция по эксплуатации
- Iiyama ProLite PLX2775HDS-B1 Инструкция по эксплуатации
- Эван C24 Инструкция по эксплуатации
- Icom MR-570R Инструкция по эксплуатации
- Iiyama ProLite PLG2773HS-GB1 Инструкция по эксплуатации
- Эван C30 Инструкция по эксплуатации
- Icom MXA-5000 Инструкция по эксплуатации
- HP Omni 120-1200er Инструкция по эксплуатации
- Эван WARMOS-5 Инструкция по эксплуатации
- Icom IC-R6 Инструкция по эксплуатации
- Lenovo C325RUR412(7B)10078 Инструкция по эксплуатации
- Эван C4 Инструкция по эксплуатации
- Icom IC-R20 Инструкция по эксплуатации
- Packard Bell ONETWO L I9420 RU DO.U6PER.004 Инструкция по эксплуатации
- Эван C5 Инструкция по эксплуатации
Скачать
Случайные обсуждения