Skil 0705 RA [9/132] I ensure that the extension cord is not trapped

Skil 0705 RA [9/132] I ensure that the extension cord is not trapped
9
Ensure that the cutting blade is at a complete standstill
when tilting the tool for crossing surfaces other than
grass and when transporting it to and from the area to be
mowed
Mow across the face of slopes (never up and down)
Be extremely careful when changing direction on slopes
Never pick up or carry the lawn mower while the motor is
running
Always switch o tool and disconnect plug from power
source if the power supply cord or the extension cord is
cut, damaged or entangled (do not touch the cord
before disconnecting the plug)
Never use the tool when cord is damaged; have it
replaced by a qualied person
USE
Cord restraint #
- hook the loop in the extension cord over restraint B as
illustrated
- pull tight to secure the extension cord
Adjusting cutting height (20-40-60 mm) $
! disconnect plug from power source and ensure
that the cutting blade has stopped rotating
- turn the mower upside down
- locate the two front wheels as well as the two rear
wheels into the desired cutting height position (20, 40
or 60 mm)
! ensure that the four wheels are fixed in the same
cutting height position
On/o safety switch %
Prevents the tool from being switched on accidentally
- switch on tool by rst pressing safety switch D and
then pulling trigger switch E
- switch o tool by releasing trigger switch E
! after switching off the tool the blade continues to
rotate for a few seconds
Operating instructions
- hold the mower with both hands
- place the mower on the edge of the lawn and mow in a
forward direction
- reverse at the end of each turn, slightly overlapping the
previous cut strip
- only use the mower on dry grass
- keep the mower away from solid objects and plants
- for mowing long grass, rst set the cutting mechanism
to the maximum cutting height, then to a lower cutting
height
! adjust your walking pace when mowing long
grass
Storage ^
- for saving substantial storage space fold the tool
handle (using wing nut F 3) and store the tool as
illustrated; empty grass box first
! ensure that the (extension) cord is not trapped
when folding/unfolding the tool handle (do not
drop the handle)
- do not place other objects on top of the mower when
stored
- store the mower indoors in a dry place
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots J 3)
Clean the mower after each use with a hand brush and a
soft cloth
! do not use water (especially no high-pressure
sprays)
- remove compacted grass cuttings from the blade area
with a wooden or plastic implement
Regularly check the grass box for wear or damage
Regularly check for worn or damaged blades and bolts
and have them replaced in sets to preserve balance
Replacing the cutting blade &
! disconnect plug from power source and remove
grass box G 3
! wear protective gloves
- turn the mower upside down
- remove/mount the cutting blade with a spanner 13 as
illustrated
! only use replacement cutting blades of type
GD61BX.00.06 SKB
- thoroughly clean the shaft area and the underside of
the tool before mounting the cutting blade
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
TROUBLESHOOTING
The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! switch off the tool and disconnect the plug before
investigating the problem
Tool does not operate
- no power supply -> check power supply (power cable,
circuit breakers, fuses)
- power supply socket faulty -> use another socket
- extension cord damaged -> replace extension cord
- grass too high -> increase cutting height and tilt tool
Tool operates intermittently
- extension cord damaged -> replace extension cord
- internal wiring defective -> contact dealer/service
station
Tool leaves ragged nish or motor labours
- cutting height cut too low -> increase cutting height
- cutting blade blunt -> replace cutting blade
- underside of tool badly clogged -> clean tool
- cutting height not uniform -> set 4 wheels at same
cutting height
Cutting blade not rotating
- cutting blade obstructed -> clear obstruction
- blade nut/bolt loose -> tighten blade nut/bolt
Tool vibrates abnormally
- cutting blade damaged -> replace cutting blade
- blade nut/bolt loose -> tighten blade nut/bolt

Содержание

MAINTENANCE SERVICE Ensure that the cutting blade is at a complete standstill when tilting the tool for crossing surfaces other than grass and when transporting it to and from the area to be mowed Mow across the face of slopes never up and down Be extremely careful when changing direction on slopes Never pick up or carry the lawn mower while the motor is running Always switch off tool and disconnect plug from power source if the power supply cord or the extension cord is cut damaged or entangled do not touch the cord This tool is not intended for professional use Always keep tool and cord clean especially ventilation slots J Clean the mower after each use with a hand brush and a soft cloth I do not use water especially no high pressure sprays remove compacted grass cuttings from the blade area with a wooden or plastic implement Regularly check the grass box for wear or damage Regularly check for worn or damaged blades and bolts and have them replaced in sets to preserve balance Replacing the cutting blade before disconnecting the plug Never use the tool when cord is damaged have it replaced by a qualified person I disconnect plug from power source and remove grass box G I wear protective gloves USE Cord restraint hook the loop in the extension cord over restraint B as illustrated pull tight to secure the extension cord Adjusting cutting height 20 40 60 mm turn the mower upside down remove mount the cutting blade with a spanner 13 as illustrated I only use replacement cutting blades of type GD61BX 00 06 SKB I disconnect plug from power source and ensure that the cutting blade has stopped rotating thoroughly clean the shaft area and the underside of the tool before mounting the cutting blade If the tool should fail despite the care taken in manufacturing and testing procedures repair should be carried outby an after sales service centre for SKIL power tools send the tool undismantled together with proof of purchase to your dealer or the nearest SKIL service station addresses as well as the service diagram of the tool are listed on www skil com turn the mower upside down locate the two front wheels as well as th e two rear wheels into the desired cutting height position 20 40 or 60 mm I ensure that the four wheels are fixed in the same cutting height position On off safety switch Prevents the tool from being switched on accidentally switch on tool by first pressing safety switch D and then pulling trigger switch E switch off tool by releasing trigger switch E TROUBLESHOOTING The following listing shows problem symptoms possible causes and corrective actions if these do not identify and correct the problem contact your dealer or service station after switching off the tool the blade continues to rotate for a few seconds Operating instructions hold the mower with both hands place the mower on the edge of the lawn and mow in a forward direction reverse at the end of each turn slightly overlapping the previous cut strip only use the mower on dry grass keep the mower away from solid objects and plants for mowing long grass fl rst set the cutti ng m echanism to the maximum cutting height then to a lower cutting height switch off the tool and disconnect the plug before Investigating the problem Tool does not operate no power supply check power supply power cable circuit breakers fuses power supply socket faulty use another socket extension cord damaged replace extension cord grass too high increase cutting height and tilt tool Tool operates intermittently extension cord damaged replace extension cord internal wiring defective contact dealer service station Tool leaves ragged finish or motor labours cutting height cut too low increase cutting height cutting blade blunt replace cutting blade underside of tool badly clogged clean tool cutting height not uniform set4 wheels atsame cutting height Cutting blade not rotating cutting blade obstructed clear obstruction blade nut bolt loose tighten blade nut bolt Tool vibrates abnormally cutting blade damaged replace cutting blade blade nut bolt loose tighten blade nut bolt I adjust your walking pace when mowing long grass Storage for saving substantial storage space fold the tool handle using wing nut F and store the tool as illustrated empty grass box first I ensure that the extension cord is not trapped when folding unfolding the tool handle do not drop the handle do not place other objects on top of the mower when stored store the mower indoors in a dry place 9

Скачать