Bosch GCM 12 GDL [44/456] Maintenance and service
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch GCM 12 GDL [44/456] Maintenance and service

Bosch GCM 12 GDL Professional [44/456] Maintenance and service
44 | English
1 609 929 W31 | (22.3.11) Bosch Power Tools
Checking: (see figure V1)
– Set an angle gauge to 45° and place it on the saw table 38.
The leg of the angle gauge must be flush with the saw blade 40
over the complete length.
Adjusting: (see figure V2)
– Screw set screw 71 in or out with the an open-end spanner
(8 mm) until the leg of the angle gauge is flush with the saw
blade over the complete length.
– Retighten the lock lever 17 again.
When the angle indicators 33 and 24 are not in line with the
45° marks of scale 32 after adjusting, firstly once more check
the 0° setting for the bevel angle and the angle indicators.
Then repeat the adjustment of the 45° bevel angle.
Setting the Standard 45° Bevel Angle (Rightward)
– Bring the power tool into the working position.
– Turn the saw table 38 to the 0° detent 18. The lever 16
must be felt to engage in the detent.
– Pull the right fence extension 9 completely outward.
– Loosen the lock lever 17.
– Lightly tilt the glide arm leftward out of the 0°
position via handle 4 and turn rotary knob 39
until the righthand bevel angle range is indicat-
ed.
– Tilt the glide arm via handle 4 rightward to the stop (45°).
Checking: (see figure W1)
– Set an angle gauge to 135° and place it on the saw table
38.
The leg of the angle gauge must be flush with the saw blade 40
over the complete length.
Adjusting: (see figure W2)
– Screw set screw 72 in or out with the an open-end spanner
(8 mm) until the leg of the angle gauge is flush with the saw
blade over the complete length.
– Retighten the lock lever 17 again.
When the angle indicators 33 and 24 are not in line with the
45° marks of scale 32 after adjusting, firstly once more check
the 0° setting for the bevel angle and the angle indicators.
Then repeat the adjustment of the 45° bevel angle.
Aligning the Scale for Mitre Angles
– Bring the power tool into the working position.
– Turn the saw table 38 to the 0° detent 18. The lever 16
must be felt to engage in the detent.
Checking: (see figure X1)
– Adjust an angle gauge to 90° and position it between the
fence 10 and the saw blade
40 on the saw table 38.
The leg of the angle gauge must be flush with the saw blade 40
over the complete length.
Adjusting: (see figure X2)
– Loosen all four set screws 73 with the Allen key (4 mm) 20
and turn the saw table 38 together with the scale 37 until
the leg of the angle gauge is flush with the saw blade over
the complete length.
– Retighten the screws again.
When the angle indicator 59 is not in line with the 0° mark of
scale 37 after adjusting, loosen screw 74 with a Phillips
screwdriver and align the angle indicator alongside the
0°mark.
Adjusting the Clamping Force of Lock Lever 17
(see figure Y)
The clamping force of lock lever 17 can be readjusted.
Checking:
– The clamping force of the lock lever must securely hold the
position of the glide arm at any bevel angle.
Adjusting:
– Loosen the lock lever 17.
– Turn set screw 75 in anticlockwise direction with a socket
spanner (size 17 mm) to reduce the clamping force, or in-
crease the clamping force by turning in clockwise direc-
tion.
– Adjust a vertical bevel angle, retighten lock lever 17 and
check if the desired clamping force has been reached.
Transport (see figure Z)
Before transporting the power tool, the following steps must
be carried out:
– Slide glide arm 28 completely to the rear and secure it in
this position (see “Securing the Glide Arm”, page 38).
– Make sure that the depth stop 30 is pushed completely in-
ward and that adjusting screw 29 fits through the recess
without touching the depth stop when moving the glide
arm.
– Guide the glide arm downward until transport safety-lock
31 can be pushed completely inward.
– Slide the table extensions 11 completely inward.
– Set the vertical bevel angle to 0° and tighten the lock lever
17.
– Turn saw table 38 leftward to the stop and tighten locking
knob 15.
– Wind up the mains cable and tie it together with Velcro
strap 76.
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– Carry the machine by the transport handle 7 or hold it by
the recessed handles 19 on the sides of the saw table.
f When transporting the power tool, only use the trans-
port fixtures. Never carry the power tool by the protec-
tive devices, the glide arm 28 or the handle 4.
f The power tool should always be carried by two per-
sons in order to avoid back injuries.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull the mains
plug.
If the machine should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by
an after-sales service centre for Bosch power tools.
OBJ_BUCH-1360-001.book Page 44 Tuesday, March 22, 2011 12:01 PM

Содержание

Похожие устройства

OBJ_BUCH 1360 001 book Page 44 Tuesday March 22 2011 12 01 PM 441 English Checking seefigureVl When the angle indicator 59 is not in line with the 0 mark of Set an angle gauge to45 and place it on the saw table 38 scale37 after adjusting loosen screw 74 with aPhillips The leg of theangle gauge must be flush with thesaw blade40 screwdriver and align the angle indicator alongside the 0 mark over the complete length Adjusting see figure V2 Screw setscrew 71 in or out with the an open end spanner Adjusting the Clamping Force of Lock Lever 17 see figure Y 8 mm until theleg of theanglegaugeis flush with the saw The clamping force of lock lever 17 can be readjusted blade over the complete length Checking Retighten the lock lever 17 again The clamping force of the lock lever must securely hold the When the angle indicators 33 and 24 are not in line with the 45 marks of scale 32 after adjusting firstly oncemore check Adjusting the 0 setting for the bevel angle and the angle indicators Loosen the lock lever 17 Then repeat the adjustment of the 45 bevel angle position of the glid e arm at any bevel angle Turn setscrew 75 in anticlockwise direction with asocket spanner size 17 mm to reduce the clamping force or in Setting the Standard 45 Bevel Angle Rightward Bring the power tool into the working position Turn thesaw table38 to the 0 detent 18 The lever 16 must be felt to engage in the detent crease the clamping force by turning in clockwise direc tion Adjust a vertical bevel angle retighten lock lever 17 and check if the desired clamping force has been reached Pull the right fence extension 9 completely outward Loosen the lock lever 17 Transport see figureZ Lightly tilt the glide arm leftward out of the 0 Before transporting the power tool the following steps must position via handle 4 and turn rotary knob 39 Zbihp be carried out until the righthand bevel angle range is indicat Slide glide arm 28 completely to the rear and secure it in this position see Securing the Glide Arm page 38 ed Til t the gli de arm vi a handl e 4 rightward to the stop 45 Make sure that the depth stop 30 is pushed completely in Checking seefigureWl ward and that adjusting screw 29 fits through the recess Set an angle gauge to 135 and place it on the saw table without touching the depth stop when moving the glide arm 38 Guide the glide arm downward until transport safety lock Theleg oftheangle gaugemust be flush with thesaw blade40 over the complete length Adjusting see figure W2 Screwsetscrew72inoroutwiththeanopen endspanner 8 mm until theleg of theanglegaugeis flush with the saw blade over the complete length Retighten the lock lever 17 again When the angle indicators 33 and 24 are not in line with the 45 marks of scale 32 after adjusting firstly oncemore check the 0 setting for the bevel angle and the angle indicators Then repeat the adjustment of the 45 bevel angle 31 can be pushed completely inward Slide the table extensions 11 completely inward Set the vertical bevel angle to 0 and tighten the lock lever 17 Turn saw table 38 leftward to thestop and tighten locking knob 15 Wind up the mains cable and tie it together with Velcro strap 76 Remove all accessories that cannot be mounted firmly to the power tool If possible place unused saw blades in an enclosed con tainer for transport Aligning the Scale for Mitre Angles Bring the power tool into the working position Turn thesaw table38 to the 0 detent 18 The lever 16 must be felt to engage in the detenL Checking see figure XI Adj ust an angle gauge to 90 and position it between the fence 10 and thesaw blade 40 on the saw table 38 Theleg oftheangle gaugemust be flush with thesaw blade40 over the complete length Adjusting see figure X2 Loosen all four setscrews 73 with the Allen key 4 mm 20 and turn the saw table 38 together with the scale 37 until the leg of the angle gauge is flush with the saw blade over the complete length Retighten the screws again 1609 929 W311 22 3 11 Carry the machine by the transport handle 7 or hold it by the recessed handles 19 on the sides of thesaw table When transporting thepowertool onlyusethetransport fixtures Never carry the power tool by the protec tive devices the glide arm 2 8 or the handle 4 The power tool should always be carried by two per sons in order to avoid back injuries Maintenance and Service Maintenance and Cleaning Before any work on the machine itself pull the mains plug If the machine should fail despite the care taken in manufac turing and testing procedures repairshould be carried outby an after sales service centre for Bosch power tools Bosch Power Tools A

Скачать
Случайные обсуждения

Ответы 1

Отрегулировать угол наклона вертикалиотносительно стола
2 года назад

Ответы 1

Срок службы от производителя?
5 лет назад