D-Link DWC-2000 [113/282] Ap firmware status

D-Link DWC-2000 User Manual 113

Section 4 - Advanced WLAN Conguration

AP Firmware Status

Status (per-AP)

A table also appears and lists each AP, its download status, and the software version it

is downloading. The status for an individual AP can have one of the following values:

• Requested: A download is planned for this AP, but the AP is not in the current

download group, so it hasn’t been told to start the download yet.

• Code‐Transfer‐In‐Progress: The AP has been told to download the code.

• Failure: The AP reported a failing code download.

• Aborted: The download was aborted before the AP loaded code from the TFTP

server.

• Waiting‐For‐APs‐To‐Download: A download nished on this AP, and it is waiting

for other APs to nish download. Reset command is not sent to the AP in this

state.

• NVRAM‐Update‐In‐Progress: Download completed successfully. The reset

command sent to the AP.

• Timed‐Out: The AP did not reconnect to the controller in the xed time interval.

AP MAC The managed AP MAC address.

Location The location of the managed AP.

Status Refer to Status (per-AP) above.

Firmware Version The current rmware version of the managed AP.