D-Link DWC-2000 [259/282] Connection problems
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DWC-2000 [259/282] Connection problems

D-Link DWC-2000 [259/282] Connection problems
D-Link DWC-2000 User Manual 259
Section 10 - Troubleshooting
Connection Problems
When an access point is converted from standalone mode to managed mode, its static IP address changes to an
IP address that is issued by the DHCP server, either one in the network or one that is congured on the wireless
controller. This occurs to ensure that each managed access point has a unique IP address.
If there is no DHCP server or if the access point cannot reach the DHCP server, the access point remains in the
Connecting state as it tries to obtain an IP address. If there is no DHCP server in the network, congure one on the
wireless controller (see “Step #1: Enable DHCP Server (Optional)” on page 25). When a DHCP server becomes
available, the access point can transition from the Connecting state to the Connected state.
If you added a new SSID, but the SSID does not appear under Wi-Fi Networks within 5 minutes, use the following
procedure to reboot the Wireless Controller.
1. Click Maintenance > Firmware > Soft Reboot.
2. Click Soft Reboot.
Network Performance and Rogue Access Point
Detection
When rogue access point detection is enabled, access points intermittently go o channel for short periods,
which can aect network performance. If security concerns are more important than network performance, you
can enable rogue access point detection. If network performance is more important than security concerns, you
can temporarily disable rogue access point detection.

Содержание

Похожие устройства

Скачать