D-Link DWC-2000 [20/282] Log in to the web management interface

D-Link DWC-2000 User Manual 20

Section 3 - Basic Conguration

Conguration procedures using the wireless controller’s web management interface are performed using one of

the following supported web browsers:

• Microsoft Internet Explorer 9.0 or higher

• Mozilla Firefox 23 or higher

• Apple Safari 5.1.7 or higher (Windows)

• Apple Safari 6.1.3 or higher (iOS)

• Google Chrome 26 or higher

Before you perform the following procedure:

• Congure your PC running the web browser to use an IP address on the 192.168.10.x network, with a

subnet mask of 255.255.255.0.

• Congure your web browser to accept cookies, prompt for pop-ups, and allow sites to run JavaScript.

• Upgrade the rmware for your wireless controller (see “Upgrading Firmware” on page 20).

• Upgrade the rmware for your access points after you upgrade the wireless controller rmware (refer to

the documentation for your access points).

To log in to the web management interface:

1. Launch a web browser on the PC.

2. In the address eld of your web browser, type the IP address for the wireless controller web

management interface. The default IP address is http://192.168.10.1. A login prompt will appear. If

the login prompt does not appear, see “Web Management Interface” on page 257.

3. If you are logging in for the rst time, the default user name is admin and the default password is

admin. Both the user name and password are case-sensitive.

Note: We recommend that you change the password to a new, more secure password (see “Editing Users” on

page 174) and record it in Appendix A.