D-Link DIS-200G-12PS [24/88] Ipv4 interface

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

The fields that can be configured are described below:

Parameter Description

System Name

Enter a system name for the Switch, if so desired. This name will

identify it in the Switch network.

System Location

Enter the location of the Switch, if so desired. This string can be

up to 255 characters long.

System Contact

Enter a contact name for the Switch, if so desired. This string can

be up to 255 characters long.

Click the Apply button to accept the changes made.

IPv4 Interface

This window is used to view and configure the IPv4 interface settings.

To view the following window, click System > System Information Settings > IPv4 Interface, as shown

below:

The fields that can be configured are described below:

Parameter Description

Get IP From

Select the get IP from option here. Options to choose from are

Static and DHCP. When the Static option is selected, users can

enter the IPv4 address of this interface manually in the fields

provided. When the DHCP option is selected, this interface will

obtain IPv4 information automatically from the DHCP server

located on the local network.

IP Address

Enter the IPv4 address for management interface here.

Mask

Enter the IPv4 subnet mask for management interface here.

Gateway

Enter the IPv4 default gateway here.

DHCP Retry Time

Enter the DHCP retry times when “Get IP From” is selected as

DHCP mode. The times are valid from 5 to 120 times. Each time of

retry contains 5 seconds.

Click the Apply button to accept the changes made.

Figure 4-3 IPv4 Interface window