D-Link DIS-200G-12PS [38/88] Snmp global settings

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

SNMP Global Settings

This window is used to configure the SNMP global settings and trap settings.

To view the following window, click Management > SNMP > SNMP Global Settings, as shown below:

The fields that can be configured for SNMP Global Settings are described below:

Parameter

Description

SNMP Global State

Select this option to enable or disable the SNMP feature.

The fields that can be configured for Trap Settings are described below:

Parameter

Description

Trap Global State

Select this option to enable or disable the sending of all or specific

SNMP notifications.

SNMP Authentication Trap

Tick this option to control the sending of SNMP authentication

failure notifications. An authenticationFailuretrap is generated

when the device receives an SNMP message that is not properly

authenticated. The authentication method depends on the version

of SNMP being used. For SNMPv1 or SNMPv2c, authentication

failure occurs if packets are formed with an incorrect community

string

Port Link Up

Tick this option to control the sending of port link up notifications. A

linkup trap is generated when the device recognizes that one of

the communication links has come up.

Port Link Down

Tick this option to control the sending of port link down

notifications. A linkDown trap is generated when the device

recognizes a failure in one of the communication links.

Coldstart

Tick this option to control the sending of SNMP coldStart

notifications.

Warmstart

Tick this option to control the sending of SNMP warmStart

notifications.

Click the Apply button to accept the changes made.

Figure 5-2 SNMP Global Settings window