Home
Главная
Ryobi
Сварочный Аппарат
FPR210 3000383
Инструкция по эксплуатации Страница: 7

Ryobi FPR210 3000383 [7/117] Applications

English

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

INSTALLING / REPLACING THE PAINT ROLLER TO

THE ROLLER HEAD

See Figure 3.

 Place roller caps in each end of the paint roller.

 Align pins in the end of each roller cap to the slot inside

the roller head. Snap into place.

INSTALLING THE PAINT ROLLER, CUT-IN OR COR-

NER PADS TO THE PAINT TUBES

See Figure 4.

Connect the roller head to the handle before installing to

the paint tube.

To connect roller head to handle:

 Insert the collar on the roller head into the hole in the

handle until they “click” together.

 Place the connector on the end of the paint tube into

the quick-connect outlet on the handle. Push until it

“clicks” into place. Pull on the tube to be certain it is

properly secured.

To attach cut-in pad or corner pad:

 Insert the collar on the cut-in or corner pad into the

hole in the handle until they “click” together.

 Place the connector on the end of the paint tube into

the quick-connect outlet on the handle. Push until it

“clicks” into place. Pull on the tube to be certain it is

properly secured.

SPECIFICATIONS

Paint area per minute

Roller 2.2 m

Tube length 3.6 m

Rating Input 230 V 50 Hz, 60 W

OPERATION

APPLICATIONS

You may use this product for the purposes listed below:

Painting interior walls

LOADING PAINT CAN ONTO THE MACHINE

See Figure 5.

Place unit on a tarp or other protected surface. The ma-

chine will accept most cylindrical paint cans up to 3.8 liters.

 Remove lid from paint can. Do not discard lid.

 Stir paint before using.

 Carefully place the paint can and lid in the paint con-

tainer well.

 Place plastic paint container lid (included) onto the

paint can.

 Lower the handle onto the paint can, aligning inlet

tubes on the handle with openings in the paint con-

tainer lid (included). Press down until inlet tubes snap

into openings securely.

 Secure the handle by latching it into place.

IDEAL VISCOSITY

Water based paints and

emulsions

12 - 18 seconds

Oil based paints 12 - 18 seconds

Wood stains/Wood preser-

vatives

no dilution

This sprayer can be used with solutions that take between

12 - 18 seconds to empty through the viscosity cup. Dip

the viscosity cup into the paint and  ll up. Time how long it

takes for the viscosity cup to empty. See Figure 14.

Using the chart (or instructions of manufacturer) as a

guide, determine if the material requires further thinning, if

so then thin accordingly.

If the paint requires thinning, start with a 10% dilution of

the paint. For example:

Amount of spray

material (ml)

1000 2000 3000 4000

Paint thinner (ml)

100 200 300 400

To do this,  ll a 1 liter container with the required paint.

Then use the viscosity cup supplied to add 100 ml of re-

quired thinner. Stir the contents thoroughly, measure the

viscosity using the viscosity chart above. If paint requires

further thinning then repeat the above step.

NOTE: Some paints are outside the ranges listed above.

Please contact our helpline for further information.

FORWARD/OFF/REVERSE SWITCH

See Figure 6.

The forward/off/reverse switch has three functions:

1. To paint, set the switch in the forward position. In for-

ward, the machine pulls the paint from the paint can

and into the paint roller, cut-in pad, or corner pad.

2. With the switch set on reverse, the machine pulls the

paint back through the paint tubes and into the paint

can/paint container leaving less paint to clean up.

3. To stop the  ow of paint, set the switch in the off

position.

DUAL CONTROL LEVER

See Figure 7.

Do not adjust the dual control lever with the machine

turned on. Always turn the machine off before changing

Содержание

Похожие устройства

INSTALLING REPLACING THE PAINT ROLLER TO THE ROLLER HEAD Lower the handle onto the paint can aligning inlet tubes on the handle with openings in the paint con tainer lid included Press down until inlet tubes snap into openings securely See Figure 3 Place roller caps in each end of the paint roller Secure the handle by latching it into place Align pins in the end of each roller cap to the slot inside the roller head Snap into place IDEAL VISCOSITY INSTALLING THE PAINT ROLLER CUT IN OR COR NER PADS TO THE PAINT TUBES Water based paints and emulsions 12 18 seconds See Figure 4 Oil based paints 12 18 seconds Connect the roller head to the handle before installing to the paint tube Wood stains Wood preser vatives no dilution To connect roller head to handle This sprayer can be used with solutions that take between 12 18 seconds to empty through the viscosity cup Dip the viscosity cup into the paint and fill up Time how long it takes for the viscosity cup to empty See Figure 14 Insert the collar on the roller head into the hole in the handle until they click together Place the connector on the end of the paint tube into the quick connect outlet on the handle Push until it clicks into place Pull on the tube to be certain it is properly secured Using the chart or instructions of manufacturer as a guide determine if the material requires further thinning if so then thin accordingly To attach cut in pad or corner pad If the paint requires thinning start with a 10 dilution of the paint For example Insert the collar on the cut in or corner pad into the hole in the handle until they click together Place the connector on the end of the paint tube into the quick connect outlet on the handle Push until it clicks into place Pull on the tube to be certain it is properly secured Amount of spray material ml 1000 2000 3000 4000 Paint thinner ml 100 200 300 400 Paint area per minute Roller Tube length 3 6 m To do this fill a 1 liter container with the required paint Then use the viscosity cup supplied to add 100 ml of re quired thinner Stir the contents thoroughly measure the viscosity using the viscosity chart above If paint requires further thinning then repeat the above step Rating Input 230 V 50 Hz 60 W NOTE Some paints are outside the ranges listed above SPECIFICATIONS 2 2 m2 Please contact our helpline for further information OPERATION FORWARD OFF REVERSE SWITCH APPLICATIONS See Figure 6 The forward off reverse switch has three functions You may use this product for the purposes listed below Painting interior walls 1 To paint set the switch in the forward position In for ward the machine pulls the paint from the paint can and into the paint roller cut in pad or corner pad 2 With the switch set on reverse the machine pulls the paint back through the paint tubes and into the paint can paint container leaving less paint to clean up 3 To stop the flow of paint set the switch in the off position LOADING PAINT CAN ONTO THE MACHINE See Figure 5 Place unit on a tarp or other protected surface The ma chine will accept most cylindrical paint cans up to 3 8 liters Remove lid from paint can Do not discard lid Stir paint before using DUAL CONTROL LEVER Carefully place the paint can and lid in the paint con tainer well See Figure 7 Do not adjust the dual control lever with the machine turned on Always turn the machine off before changing Place plastic paint container lid included onto the paint can 2

Скачать