Skil 4585 NE Инструкция по эксплуатации онлайн [9/112] 92753
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 4585 NE Инструкция по эксплуатации онлайн [9/112] 92753

Skil 4585 NE Инструкция по эксплуатации онлайн [9/112] 92753
9
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR JIG SAWS
GENERAL
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
• Check the functioning of the tool before each use and, in
case of a defect, have it repaired immediately by a
qualied person; never open the tool yourself
• Do not work materials containing asbestos (asbestos
is considered carcinogenic)
• This tool should not be used by people under the age of
16 years
• The noise level when working can exceed 85 dB(A); wear
ear protection
• Wear protective goggles when working with materials
which produce chips
• Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wear a dust mask and work with a dust
extraction device when connectable
• Certain kinds of dust are classied as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wear a dust mask and
work with a dust extraction device when
connectable
• Follow the dust-related national requirements for the
materials you want to work with
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• Alwaysdisconnectplugfrompowersourcebefore
making any adjustment or changing any accessory
BEFORE USE
• Remove all obstacles on top of as well as underneath the
cutting path before you start cutting
• Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
• Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
DURING USE
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord (a cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock)
• Always keep the cord away from moving parts of the tool;
direct the cord to the rear, away from the tool
• If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
• Never use the tool when cord is damaged; have it
replaced by a qualied person
• In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
• Keep hands away from the saw blade while the tool is in
use
ACCESSORIES
• SKIL can assure awless functioning of the tool only
when the correct accessories are used which can be
obtained from your SKIL dealer
• Do not use a saw blade which is cracked, deformed or dull
OUTDOOR USE
• When used outdoors, connect the tool via a fault current
(FI) circuit breaker with a triggering current of 30 mA
maximum, and only use an extension cord which is
intended for outdoor use and equipped with a
splashproof coupling-socket
AFTER USE
• When you put away the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
• On/o 4
• Speed control for smooth starting 5
• Switch locking for continuous use 6
• Changing saw blades 7
! insert blade to full depth with teeth facing forward 8
• Sawing at 15°/30°/45° 9
• Adjusting sawing speed to material used 0
! if the tool does not run with wheel E in position 1,
select a higher sawing speed and lower the
sawing speed while the tool runs
• Selecting sawing mode !
Use lever F 2 for adjusting the orbital action from
accurate cutting (= 0) to fast cutting (= 4)
- 1 setting (“0”) for accurate cutting in all materials,
straight + curved
- 4 settings for fast cutting in dierent materials, straight
cuts only
1 = metal
2 = plastic
3 = hard wood
4 = soft wood
! always select “0” when sawing splinter-sensitive
material

Содержание

Похожие устройства

e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc In accordance with these Instructions taking Into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 5 SERVICE a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained DURING USE Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or Its own cord a cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock Always keep the cord away from moving parts of the tool direct the cord to the rear away from the tool If the cord is damaged or cut through while working do not touch the cord but immediately disconnect the plug Never use the tool when cord is damaged have it replaced by a qualified person In case of electrical or mechanical malfunction immediately switch off the tool and disconnect the plug Keep hands away from the saw blade while the tool is in use ACCESSORIES SKILcan assure flawless functioning of the tool only when the correct accessories are used which can be obtained from your SK1L dealer Do not use a saw blade whi ch is cracked deformed or dull OUTDOOR USE When used outdoors connect the tool via a fault current Fl circuit breaker with a triggering current of 30 mA maximum and only use an extension cord which is intended for outdoor use and equipped with a splashproof coupling socket AFTER USE When you put away the tool switch off the motor and ensure that all moving parts have come to a complete standstill WHEN CONNECTING NEW 3 PIN PLUG U K ONLY Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended SAFETY INSTRUCTIONS FOR JIG SAWS GENERAL Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool tools with a rating of 230V or 240V can also be connected to a 220V supply Check the functioning of the tool before each use and in case of a defect have it repaired immediately by a qualified person never open the tool yourself Do not work materials containing asbestos asbestos is considered carcinogenic This tool should not be used by people under the age of 16 years The noise level when working can exceed 85 dB A wear ear protection Wear protective goggles when working with materials which produce chips Dust from material such as paint containing lead some wood species minerals and metal may be harmful contact with or inhalation of the dust may cause allergic reactions and or respiratory diseases to the operator or bystanders wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning wear a dust mask and work with a dust extraction device when connectable Fol low the dust related nation al requirements for th e materials you want to work with Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps Always disconnect plug from power source before making any adjustment or changing any accessory BEFORE USE Remove all obstacles on top of as well as underneath the cutting path before you start cutting Avoid damage that can be caused by screws nails and other elements in your workpiece rem we them before you start working Secure the workpiece a workpiece clamped with clamping devices or in a vice is held more securely than by hand USE On offu Speed control for smooth starting Switch locking for continuous use Changing saw blades Insert blade to full depth with teeth facing forward Sawing at 15730745 Adj usting sawi ng speed to material used If the tool does not run with wheel E In position 1 select a higher sawing speed and lower the sawing speed while the tool runs Selecting sawing mode Use lever F for adjusting the orbital action from accurate cutting 0 to fast cutting 4 1 setti ng 0 for accurate cutti ng i n all materials straight curved 4 settings for fast cutting in different materials straight cuts only 1 metal 2 plastic 3 hard wood 4 soft wood I always select 0 when sawing splinter sensitive material 9

Скачать