Maxwell MW-3810 GD [17/72] English

Maxwell MW-3810 GD [17/72] English
17
ENGLISH
Failure Possible Cause Solution
Steam is released from
under the lid (8) during
cooking.
The silicone gasket is not installed.
Switch the unit off, release the
pressure in the multicooker, open the
lid. Install the silicone gasket.
The silicone gasket is very dirty. Clean the silicone gasket.
The silicone gasket is damaged. Replace the silicone gasket.
The lid (8) is not closed tightly. Close the lid (8) tightly.
Air comes out through
the blocking system
valve (11).
The valve is dirty.
Switch the multicooker off, remove
the lid and clean the valve.
The silicone ring of the blocking
system valve is damaged.
Replace the silicone ring of the valve.
The blocking system
valve (11) does not
go up.
The pressure control valve (10) is
installed improperly.
Make sure that the valve (10) is
installed properly.
Not enough ingredients or liquid for
steam generation.
Follow the recommendations for
amount of products and liquid in the
bowl.
The manufacturer preserves the right to change
the specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-3810.indd 17 26.12.2013 15:20:41

Содержание