D-Link DGS-3048 [34/147] Ip address

DGS-3048 Gigabit Ethernet Switch Manual

Parameter Description

system. You may also want to include a phone number or extension.

IP Address

Figure 7-2. Switch IP Settings Window

This window is used to determine whether the Switch should get its IP Address settings from the user (Manual), a DHCP

server. If you are not using DHCP, enter the IP Address, Subnet Mask, and Default Gateway of the Switch. If you enable

DHCP, a Dynamic Host Configuration Protocol request will be sent when the Switch is powered up. Once you have

selected a setting under Get IP From, click

Apply to activate the new settings.

The information is described as follows:

Parameter Description

Get IP From

There are two choices for how the Switch receives its IP Address settings: Manual and

DHCP.

IP Address

The host address for the device on the TCP/IP network.

Subnet Mask

The address mask that controls subnetting on your TCP/IP network.

Default Gateway

The IP address of the device—usually a router—that handles connections to other

subnets and/or other TCP/IP networks.

Management VLAN

Name

Name of Management VLAN