AXIOMET AX-EL300W60A [38/72] Local operation

5. Local Operation

5.0.

The local operation of the load has been briefly introduced in Chapter3 Functions and Features. In this

chapter, it will be explained in details with examples.

5.1. Local Control

If you need to control the load via operations on the front panel, the load must stay in the local control

status. The load enters into local control status once it is powered on, and preset parameters saved in

EEPROM location 0 will be recalled automatically.

Under remote control status, all operations on front panel keypad and knobs become invalid (except

“Lock/Local” key). When the load receives a remote command (SYST:REM) via RS232, the remote control

goes into effect and Rmt annunciator is turned on. Under remote control status, all operations on electronic

load are controlled by remote controller. The electronic load will return to local control after receiving the

return command (e.g. : SYST:LOC). Or you can return the electronic load to local control by long-pressing

“Lock/Local”key.

5.2. Main Operation on the Front Panel

- Connecting to the Power Supply

- Turning the Input On/Off

- CC Mode

- CV Mode

- CR Mode

- CP Mode

- Short Circuit Operation

- Continuous Transient Operation

- Pulsed Transient Operation

- Toggled Transient Operation

- Sequence (List) Operation

- Battery Discharge Operation

- Saving and Recalling Parameters

- Clear Protection Settings

- Error Messages

- Triggered Operation

- Main Menu