AXIOMET AX-EL300W60A [44/72] Short circuit operation

5.6. Short Circuit Operation

The operating procedures for short circuit operation are shown as below:

1) Press “Menu” key to enter into the selectable menu.

2) Use Entry keys or use the knob to select “0 System Set”, and press “Enter” key to confirm and enter into

System Set

3) Select Short (short circuit) item with “↓” key.

4) Operate all the above steps or press “Shift”+“�Short” keys to select Short (short circuit) item.

5) Use Entry keys or knob to set On, and press “Enter” key to confirm.

6) Press “Cancel” key to exit the main menu. The display shows “s” to indicate in the basic test mode.

7) Select one basic test mode; press “Enter” key to confirm and exit the mode selection and parameter

setting menu.

8) Press “On/Off” key to turn on the load.

Example1: The load was in CVH mode previously and it is turned off. Set the load to short circuit in CCH

status. Turn on the load to execute short circuit operation.

Procedures /// Operation Descriptions /// Display

1 /// Press “Menu” key to enter into the selectable menu. /// MENU 0 SYST

2 /// Use Entry keys or use the knob to select “0 System Set”, press “Enter” key to confirm and enter into

System Set. /// CC Set 0 Low

3 /// Use Entry keys or use the knob to select “1 High”, press “Enter” key to confirm. /// CC Set 1 High

4 /// Select Short (short circuit) item with “↓” key. /// SHORT 0Off

5 /// Use Entry keys or knob to set On, and press “Enter” key to confirm. /// SHORT 1On

6 /// Press “Cancel” key to exit the main menu. The display shows “s” to indicate in CVH mode. /// CVH

0.000V

7 /// Select CCH mode by pressing “I-set” key. press “Cancel” key to exit the mode selection and parameter

setting menu. /// CCH 44.000A

8 /// Press “On/Off” key to turn on the load. ///

For the above operating procedures, the corresponding SCPI commands should be:

INPUT:SHORT ON ; Sets the load to short circuit operation

MODE CCH ; Sets mode

INPUT ON ; Turns on the load

Example2: Based on the last example, exit the short circuit operation, and turn off the load.

Procedures /// Operation Descriptions /// Display

1 /// Press “Menu” key to enter into the selectable menu and the load is turned off automatically. /// MENU

0 SYST

2 /// Use Entry keys or use the knob to select “0 System Set”, press “Enter” key to confirm and enter into

System Set. /// CC Set 0 Low

3 /// Use Entry keys or use the knob to select “1 High”, press “Enter” key to confirm. /// CC Set 1 High

4 /// Select Short (short circuit) item with “↓” key. /// SHORT 0On

5 /// Use Entry keys or knob to set Off, and press “Enter” key to confirm. /// SHORT 1Off