AXIOMET AX-EL300W60A Расширенная инструкция онлайн [43/72] 527990

2 /// Use Entry keys or use the knob to select “0 System Set”,press “Enter” key to confirm and enter into

System Set. /// CC Set 0 Low

3 /// Select “Syst CR Set” with “↑” and “↓” keys. /// CP Set 1 CPC

4 /// Use Entry keys or use the knob to select “0 CPV”,press “Enter” key to confirm. /// CP Set 0 CPV

5 /// Press “Cancel” key to exit and return to the basic mode. /// VHCRL 1.200R

6 /// Press “P-set” key to enter into the parameter setting menu. Use Entry keys or use the knob together

with “ ” and “ ” keys to input the power value to 100. /// SCPV 100.00W

7 /// Press “Enter” key to confirm and exit the parameter setting menu. /// CPV 100.00W

8 /// Press “On/Off” key to turn on the load. ///

For the above operating procedures, the corresponding SCPI commands should be:

MODE CPV ; Sets mode

POW 100 ; Sets the power value

INPUT ON ; Turns on the load

Example2: Set the power value to 200W in CPV. Turn on the load, and there are two ways to set the power

value.

Solution 1:

Procedures /// Operation Descriptions /// Display

1 /// Press “P-set” key to enter into the parameter setting menu. /// SCPV 100.00W

2 /// Use Entry keys or use the knob together with “ ” and “ ” keys to input the power value to 200. /// SCPV

200.00W

3 /// Press “Enter” key to confirm and exit the mode selection and parameter setting menu. /// SCPV

200.00W

4 /// Press “On/Off” key to turn on the load. ///

Solution 2:

Procedures /// Operation Descriptions /// Display

1 /// Move the cusor to the hundredths with “ ” key. /// CPV 100.00W

2 /// Rotate the knob to set the hundredths to 2. (The set value will be changed when rotating the knob.

The set value will become effective at input at once when the load is turned on.). /// CPV 200.00W

3 /// Press “On/Off” key to turn on the load. ///

For the above operating procedures, the corresponding SCPI commands should be:

MODE CPV ; Sets mode

POW 200 ; Sets the power value

INPUT ON ; Turns on the load

Note:

CPV/CPC will be shown respectively in the lower right corner of the display when the load is in CPV or

CPV mode.