AXIOMET AX-EL300W60A [67/72] Main specifications

5 /// Use “↑”, “↓” keys to select the parameter end step. Use Entry keys or the knob together with “ ”, “ ”

keys to input the end step to 2, and press “Enter” key to confirm. /// END ST 2

6 /// Please refer to 6.4.1operation steps, and set parameters according to table 4-C. ///

Table 7-C: -15V/0.5A parameter setting:

Step /// Mode /// Level /// Min /// Max /// Delay

0 /// CCL /// 0.000A /// 15.000V /// 16.000V /// 1s

1 /// CCL /// 0.500A /// 14.200V /// 16.000V /// 2s

2 /// CVL /// 14.500V /// 0.400A /// 0.600A /// 2s

After completing all the above settings, connect the power supply to the load’s input terminals according

1 /// Set the external trigger as the load’s trigger mode. /// FUNCTI 0 Input; SOURCE 1 Pluse

2 /// Other test refers to 6.1 section. ///

After completing all the above steps, connect the test signal to load’s input terminal, input a trigger signal

at test signal terminal, and then activate auto test. When the test is passed, the PASS signal outputs high

level; When the test is failed, the FAIL signal outputs high level; in other states, the PASS signal and FAIL

signal output low level.

8. Main Specifications

The warm-up time is 30 minutes. Specifications indicate warranted performance in the 25℃±5℃ region

of the total temperature range.

Rated input (0℃~40℃)

Resolution /// 1mV

Accuracy /// ±(0.05%+0.02%FS)

High range /// 0.10~150V