AXIOMET AX-EL300W60A Расширенная инструкция онлайн [42/72] 527990

with “ ” and “ ” keys to input the resistance value to 1.5. /// SVHCRL 1.5000R

7 /// Press “Enter” key to confirm and exit the parameter setting menu. /// VHCRL 1.5000R

8 /// Press “On/Off” key to turn on the load. ///

For the above operating procedures, the corresponding SCPI commands should be:

MODE VHCRL ; Sets mode

RES 1.5 ; Sets the resistance value

INPUT ON ; Turns on the load

Example2: Set the resistance value to 1.2Ω in VH CRL. Turn on the load, and there are two ways to set

the resistance value.

1.2000R

4 /// Press “On/Off” key to turn on the load. ///

Solution 2

Procedures /// Operation Descriptions /// Display

1 /// Move the cusor to the tenths with “ ” key. /// VHCRL 1.5000R

2 /// Rotate the knob to set the tenths to 2. (The set value will be changed when rotating the knob. The set

value will become effective at input at once when the load is turned on.). /// VHCRL 1.2000R

3 /// Press “On/Off” key to turn on the load. ///

For the above operating procedures, the corresponding SCPI commands should be:

MODE VH CRL ; Sets mode

CP mode includes constant power-voltage source mode (CPV) and constant power-current source mode

(CPC).

Example1: Set the load to CPV and set the power value to 100W in CRL. Turn on the load, and

check the present power value. The operating procedures are shown as below:

Procedures /// Operation Descriptions /// Display

1 /// Press “Menu” key to enter into the selectable menu. /// MENU 0 SYST