Honda VTR1000F (1998-2003) — настройка топливной системы для высокогорных условий [109/377]

FUEL SYSTEM HIGH ALTITUDE ADJUSTMENT These adjustment must oe made at high altitude to ensure proper high altitude operation When the vehicle is to he operated continuously above 2 000 m 6 500 feet the carburetors must be readjusted as described below to improve drive ability and decrease exhaust emissions Remove the carburetor assembly with the air cleaner housing attached page 5 5 Drain the carburetors and remove the float cham bers Change each main jet for a high altitude one HIGH ALTITUDE MAIN JET Front 172 Rear 175 Install the float chambers Install the carburetor assembly page 5 1B Warm up the engine to operating temperature Stop and go driving for 10 minutes is sufficient Turn each pilot screw in to the specification given TOOL Pilot screw wrench 07KMA MN90100 or 07MMA MV9010A U S A only HIGH ALTITUDE SETTING 1 2 turn in Adjust the idle speed with the throttle Stop screw IDLE SPEED 1 200 100 rpm Attach the Vehicle Emission Control Information Update label on the left side of the frame near the steering head as shown See Service Letter No 132 for information on ob taining the label NOTE Do not attach the label to any part that can he easily removed from the vehicle CAUTION Sustained operation at an altitude lower than 1 500 m 5 000 feet with the carburetors adjusted for high altitude may cause the engine to idle roughly and the engine stall in traffic It may also cause engine damage due to overheating