Honda VTR1000F (1998-2003) — проверка и обслуживание заднего колеса и подвески [265/377]

REAR WHEEL SUSPENSION WHEEL Check the rim runout by placing the wheel in a truing stand Spin the wheel slowly and read the runout using a dial indicator Actual runout is 1 2 the total indicator reading SERVICE LIMITS RADIAL 2 0 mm 0 08 in AXIAL 2 0 mm 0 08 in WHEEL BEARING Turn the inner race of each bearing with your finger The bearings should turn smoothly and quietly Also check that the bearing outer race fits tightly in the hub Replace the wheel bearings in pairs Remove and discard the hearings if the races do not turn smoothly and quietly or if they fit loosely in the hub DRIVEN SPROCKET Check the condition of the driven sprocket teeth Replace the sprocket if worn or damaged NOTE If the driven sprocket requires replacement in spect the drive chain and drive sprocket Never install a new drive chain on a worn sprock et or a worn chain on new sprockets Both chain and sprocket must be in good condition or the replacement chain or sprocket will wear rapidly DISASSEMBLY Remove the right dust seal Remove the bolts and brake disc