Honda VTR1000F (1998-2003) [357/377] Lights meters switches

LIGHTS METERS SWITCHES COOLANT TEMPERATURE GAUGE THERMOSENSOR INSPECTION 98 00 Temperature gauge does not operate properly 1 Disconnect the thermosensor wire connector and ground it with a jumper wire 2 Turn the ignition switch ON coolant temperature gauge needle The needle should move to H and check the CAUTION Immediately turn the ignition switch OFF when the needle moves to H hot to prevent the gauge from being damaged If the needle moves check the thermosensoi page 19 16 If the needle does nnt move go to step 3 3 Remove the three bolts and the combination meter assembly from the stay page 19 7 Check the green blue wire for continuity between the thermosensor and combination meter There should be continuity If there is continuity go to step 4 If there is no continuity repair the open circuit in the green blue wire 4 Turn the ignition switch ON and measure the voltage between the black brown and green black wire terminals There should be battery voltage If there is battery voltage replace the coolant temperature gauge page 19 7 If there is no voltage check for an open circuit in the black brown and green black wires COOLANT TEMPERATURE GAUGE