Honda VTR1000F (1998-2003) [112/377] Pair check valve inspection

FUEL SYSTEM PAIR CHECK VALVE INSPECTION Fur the rear cylinder PAIR check valve removal remove the fuel tank page 2 4 Remove the bolts PAIR check valve cover and PAIR check valve from the cylinder head cover Check the reed for damage or fatigue Replace if necessary Replace the PAIR check valve if the rubber seat is cracked deteriorated or damaged or if there is clearance between the reed and seat Install the PAIR check valve and cover onto the cyl inder head cover Apply locking agent to the cover bolt threads Install and tighten the bolts TORQUE b N m O b kgf m 3 6 Ibf ft EVAPORATIVE EMISSION CONTROL SYSTEM California type only NOTE Refer to the Vacuum Hose Routing Diagram and Cable Harness Routing page 1 29 for the tube connections arid routing EVAPORATIVE EMISSION EVAP CANISTER REMOVAL INSTALLATION Disconnect the No 1 and No 4 tubes from the EVAP canister and remove the three bolts and the EVAP canister with the bracket Remove the three bolts and EVAP canister from the bracket Install the EVAP canister in the reverse order of removal