Honda VTR1000F (1998-2003) — замена тормозной жидкости и прокачка гидравлических тормозов [286/377]

HYDRAULIC BRAKE BRAKE FLUID REPLACEMENT AIR BLEEDING A WARNING A contaminated brake disc or pad reduces stopping power Discard contaminated pads and clean a contaminated disc with a high quality brake degreasing agent CAUTION Do not allow foreign material to enter the sys tem when filling the reservoir Avoid spilling fluid on painted plastic or rubber parts Place a rag over these parts whenever the system is serviced Use only DOT 4 brake fluid from a sealed con tainer Do not mix different types of fluid They are not compatible BRAKE FLUID DRAINING Remove the reservoir cap set plate and diaphragm page 3 19 for front page 3 20 for rear Connect a bleed hose to the bleed valve Loosen the bleed valve and pump the brake lever or pedal until no more fluid flows out of the bleed valve BRAKE FLUID FILLING BLEEDING Close the bleed valve Fill the reservoir with DOT 4 brake fluid from a sealed container Connect a commercially available brake bleeder to the bleed valve Pump the brake bleeder and loosen the bleed valve Add brake fluid when the fluid level in the reservoir is low NOTE Check the fluid level often while bleeding the brake to prevent air from being pumped into the system When using a brake bleeding tool follow the manufacturer s operating instructions