Honda VTR1000F (1998-2003) — управление и обслуживание цепи привода: советы и рекомендации [61/377]

MAINTENANCE ADJUSTMENT Loosen the rear axle nut Turn both adjusting bolts an equal number of turn until the correct drive chain slack is obtained Make sure the index marks on both adjusters are aligned with the index line on the swingarm Tighten the rear axle nut TORQUE 93 N m 9 5 kyf m 69 lbf ft Recheck the drive chain slack and free wheel rota tion Check the drive chain wear indicator label attached on the left drive chain adjuster If the red zone of the indicator label reaches the index line on the swingarm replace the drive chain with a new one page 3 17 CLEANING AND INSPECTION Clean the chain with a soft brush using a non flam mable or high flash point solvent and wipe it di y Be sure the chain has dried completely before lubri cating Inspect the drive chain for possible damage or wear Replace any chain that has damaged rollers loose fitting links or otherwise appears unserviceable Installing a new chain on hadly worn sprockets will cause the new chain to wear quickly Inspect and replace the sprockets as necessary LUBRICATION Lubricate the drive chain with 80 90 gear oil or equivalent chain lubricant designed for specifically for use on O ring chains Some commercially available chain lubricants may contain solvents which could damage the O rings Wipe off the excess chain lube