D-Link DNS-722-4 [40/88] Schedule configuration

36D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Schedule Configuration

Set Recording Schedule Conguration

Step 1: Enter the desired Start Time and End

Time.

Step 2: Enter pre-record period and post-record for

event trigger recording.

Step 3: Check the enable audio box to record audio

Note

• The Always Record option will start recording immediately.

• When configuring the Motion Detection event, be sure to set up the motion detection function on your camera first.

• After changing the motion detection settings of your camera, be sure to disconnect the camera from the NVR and then re-connect it to update all new

changes.

• When setting up an event, a video motion or digital input can be used to trigger the other cameras. This means that when motion is detected by a camera,

the NVR can send out warning signals to the other connected cameras.

• Alternatively users can drag the time bar to change the recording period. The red bar represents the Always Record feature and the blue bar represents

the Event Recording feature.

*DNS-722-4 does not support “Record on event” function.