D-Link DNS-722-4 [42/88] Event setup

38D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Conﬁguration

Event Setup

Connection lost:

Motion Detected:

Input:

Action is triggered if the connection between the

camera and NVR is lost.

All motions from camera will trigger the action.

External input will trigger the action.

Step 1: Choose the camera, and then select one of the three events.

Output:

E-mail:

If the event occurs, the system will send a signal to

other connected devices.

If the event occurs, the system will send an E-mail

to the pre-set contacts.

Step 2: Click the Add button to setup the actions of the

event.

Step 3: Click the action, and then click the Congure button to modify the details of that action if necessary.

Step 4: Repeat step 2 through 3 to add more actions.

Step 5: Repeat step 1 through 3 to set more cameras.

Note:

• In addition, you can also set the event notiﬁcation for when the hard disk is full.

• The screen will display the event information after you have conﬁgured the settings.

Note

Before setting the event Motion from Camera, you must ﬁrst conﬁgure

the motion detection function on your camera

This option may be congured and applied using DNS-726-4.