MSI 790FX-GD70 Инструкция по эксплуатации онлайн [46/169] 100744

En-37

English

1T/2T Memory Timing

This field controls the SDRAM command rate. Selecting [1T] makes SDRAM

signal controller to run at 1T (T=clock cycles) rate. Selecting [2T] makes SDRAM

signal controller run at 2T rate.

DCT Unganged Mode

This feature is used to Integrate two 64-bit DCTs into a 128-bit interface.

Bank Interleaving

Bank Interleaving is an important parameter for improving overclocking capability

of memory. It allows system to access multiple banks simultaneously.

Power Down Enable

This is a memory power-saving technology. When the system does not access

memory over a period of time, it will automatically reduce the memory power

supply.

MemClk Tristate C3/ATLVID

This setting allows you to enable/disable the MemClk Tristating during C3 and

ATLVID.

FSB/DRAM Ratio

This item will allow you to adjust the ratio of FSB to memory.

Adjusted DRAM Frequency (MHz)

It shows the adjusted DRAM frequency. Read-only.

HT Link Control

Press <Enter> to enter the sub-menu.

HT Incoming/ Outgoing Link Width

These items allow you to set the Hyper-Transport Link width. Setting to [Auto],

the system will detect the HT link width automatically.

HT Link Speed

This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the

system will detect the HT link speed automatically.

Adjust PCI-E Frequency (MHz)

This field allows you to select the PCIE frequency (in MHz).

Auto Disable PCI Frequency

When set to [Enabled], the system will remove (turn off) clocks from empty PCI slots

to minimize the electromagnetic interference (EMI).

CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ CPU Voltage (V)/ CPU-NB

Voltage (V)/ CPU PLL Voltage (V)/ CPU DDR-PHY Voltage (V)/ DRAM Voltage

(V)/ DDR Vref Voltage (V)/ NB PCI-E I/O Voltage (V)/ NB Voltage (V)/ NB PCI-E

Voltage (V)/ HT Link Voltage (V)/ SB Voltage (V)

These items are used to adjust the voltage of CPU, Memory and chipset.