![Hitachi CS40EANG [7/92] English](/img/pdf.png)
Hitachi CS40EANG [7/92] English
![Hitachi CS40EA [7/92] English](/views2/1081641/page7/bg7.png)
7
English
WARNINGS AND SAFETY INSTRUCTIONS
Operator safety
○ Always wear a safety face shield or goggles.
○ Gloves should be used when sharpening chain.
○ Always wear safety protective equipment such as jacket,
trousers, gloves, helmet, boots with steel toe-caps and non-slip
soles whenever you use a chain saw. For working in trees the
safety boots must be suitable for climbing techniques. Do not
wear loose clothing, jewelry, short pants, sandals or go barefoot.
Secure hair so it is above shoulder length.
○ Do not operate this tool when you are tired, ill or under the
infl uence of alcohol, drugs or medication.
○ Never let a child or inexperienced person operate the machine.
○ Wear hearing protection. Pay attention to your surroundings.
Be aware of any bystanders who may be signaling a problem.
Remove safety equipment immediately upon shutting off engine.
○ Wear head protection.
○ Never start or run the engine inside a closed room or building.
Breathing exhaust fumes can kill.
○ For respiratory protection, wear a protection mask while emitting
the chain oil mist and dust from sawdust.
○ Keep handles free of oil and fuel.
○ Keep hands away from cutting equipment.
○ Do not grab or hold the unit by the cutting equipment.
○ When the unit turned off , make sure the cutting attachment has
stopped before the unit is set down.
○ When operation is prolonged, take a break from time to time
so that you may avoid possible Hand-Arm Vibration Syndrome
(HAVS) which is caused by vibration.
○ The operator must obey the local regulations of cutting area.
WARNING
○ Antivibration systems do not guarantee that you will not sustain
Hand-Arm Vibration Syndrome or carpal tunnel syndrome.
Therefore, continual end regular users should monitor closely
the condition of their hands and fi ngers. If any of the above
symptoms appear, seek medical advice immediately.
○ Long or continuous exposure to high noise levels may cause
permanent hearing impairment. Always wear approved hearing
protection when operating a unit/machine.
○ If you are using any medical electric/electronic devices such
as a pacemaker, consult your physician as well as the device
manufacturer prior to operating any power equipment.
Unit/machine safety
○ Inspect the entire unit/machine before each use. Replace
damaged parts. Check for fuel leaks and make sure all fasteners
are in place and securely tightened.
○ Replace parts that are cracked, chipped or damaged in any way
before using the unit/machine.
○ Make sure the side case is properly attached.
○ Keep others away when making carburetor adjustments.
○ Use only accessories as recommended for this unit/machine by
the manufacturer.
○ Never let the chain strike any obstacle. If the chain makes
contact, the machine should be stopped and checked carefully.
○ Make sure the automatic oiler is working. Keep the oil tank fi lled
with clean oil. Never let chain run dry on the bar.
○ All chain saw service, other than the items listed in the
operatorʼs/ ownerʼs manual, should be performed by competent
chain-saw service personnel. (For example, if improper tools are
used to remove the fl ywheel or if an improper tool is used to hold
the fl ywheel in order to remove the clutch, structural damage
to the fl ywheel could occur and could subsequently cause the
fl ywheel to burst.)
WARNING
○ Never modify the unit/machine in any way. Do not use your unit/
machine for any job except that for which it is intended.
○ Never use chain saw without any safety equipment or that has
faulty safety equipment. It could result in serious personal injury.
○ Using guide bar/chain other than recommended by the
manufacturer which are not approved, could result in a high risk
of personal accidents or injury.
Fuel safety
○ Mix and pour fuel outdoors and where there are no sparks or
fl ames.
○ Use a container approved for fuel.
○ Do not smoke or allow smoking near fuel or the unit/machine or
while using the unit/machine.
○ Wipe up all fuel spills before starting engine.
○ Move at least 3 m away from fueling site before starting engine.
○ Stop engine before removing fuel cap.
○ Empty the fuel tank before storing the unit/machine. It is
recommended that the fuel be emptied after each use. If fuel is
left in the tank, store so fuel will not leak.
○ Store unit/machine and fuel in area where fuel vapors cannot
reach sparks or open fl ames from water heaters, electric motors
or switches, furnaces, etc.
WARNING
Fuel is easy to ignite or get explosion or inhale fumes, so that pay
special attention when handling or fi lling fuel.
Cutting safety
○ Do not cut any material other than wood or wooden objects.
○ For respiratory protection, wear an aerosol protection mask
when cutting the wood after insecticide has been applied.
○ Keep others including children, animals, bystanders and helpers
outside the hazard zone. Stop the engine immediately if you are
approached.
○ Hold the unit/machine fi rmly with the right hand on the rear
handle and the left hand on the front handle.
○ Keep fi rm footing and balance. Do not over-reach.
○ Keep all parts of your body away from the muffl er and cutting
attachment when the engine is running.
○ Keep Bar/Chain below waist level.
○ Before felling a tree, the operator must be accustomed to the
sawing techniques of the chain saw.
○ Be sure to pre-plan a safe exit from a failing tree.
○ While cutting, hold saw fi rmly with both hands with thumb fi rmly
locked around front handle, and stand with feet well balanced
and your body balanced.
○ Stand to the side of the saw when cutting - never directly behind
it.
○ Always keep the spiked bumper face to a tree, because the
chain may suddenly be drawn into a tree, if so equipped.
○ When completing a cut, be ready to hold up the units as it breaks
into clear, so it will not follow through and cut your legs, feet or
body, or contact an obstruction.
○ Be alert against kickback (when saw kicks up and back at
operator). Never cut with the nose of the bar.
○ When relocating to a new work area, be sure to shut off the
machine and ensure that all cutting attachments are stopped.
○ Never place the machine on the ground when running.
○ Always ensure that the engine is shut off and any cutting
attachments have completely stopped before clearing debris or
removing grass from the cutting attachment.
○ Always carry a fi rst-aid kit when operating any power equipment.
○ Never start or run the engine inside a closed room or building
and/or near the infl ammable liquid. Breathing exhaust fumes
can kill.
Maintenance safety
○ Maintain the unit/machine according to recommended
procedures.
○ Disconnect the spark plug before performing maintenance
except for carburetor adjustments.
○ Keep others away when making carburetor adjustments.
○ Use only genuine HITACHI replacement parts as recommended
by the manufacturer.
CAUTION
Do not disassemble the recoil starter. You may get a possibility
of personal injury with recoil spring.
WARNING
Improper maintenance could result in serious engine damage or
in serious personal injury.
000Book_CS40EA_EE.indb 7000Book_CS40EA_EE.indb 7 2010/09/03 14:50:322010/09/03 14:50:32
Содержание
- Cs 40ea 1
- English 6
- Meanings of symbols 6
- What is what 6
- English 7
- Warnings and safety instructions 7
- English 8
- Specifications 8
- Assembly procedures 9
- English 9
- Operating procedures 9
- English 10
- English 11
- Maintenance 11
- English 12
- Bedeutungen der symbole 13
- Deutsch 13
- Teilebezeichnungen 13
- Übersetzung der original gebrauchsanweisung 13
- Deutsch 14
- Warn und sicherheitshinweise 14
- Deutsch 15
- Technische daten 15
- Betrieb 16
- Deutsch 16
- Zusammenbau 16
- Deutsch 17
- Deutsch 18
- Deutsch 19
- Wartung 19
- Deutsch 20
- Tι ειναι τι 21
- Ελληνικά 21
- Επεξηγηση συμβoλων 21
- Μετάφραση των αρχικών οδηγιών 21
- Ελληνικά 22
- Προειδοποιησεισ και υποδειξεισ ασφαλειασ 22
- Ελληνικά 23
- Διαδικασιεσ συναρμολογησησ 24
- Ελληνικά 24
- Τεχνικα χαρακτηριστικα 24
- Διαδικασια λειτουργιασ 25
- Ελληνικά 25
- Ελληνικά 26
- Ελληνικά 27
- Συντηρηση 27
- Ελληνικά 28
- Ελληνικά 29
- Polski 30
- Tłumaczenie oryginalnych instrukcji 30
- Zasadnicze podzespoły urządzenia 30
- Znaczenie symboli 30
- Ostrzeżenie i instrukcje bezpieczeństwa 31
- Polski 31
- Polski 32
- Specyfikacje 32
- Polski 33
- Procedury montażu 33
- Procedury obsługi 33
- Polski 34
- Konserwacja 35
- Polski 35
- Polski 36
- Polski 37
- Fordítás az eredeti útmutatót 38
- Magyar 38
- Mi micsoda 38
- Szimbólumok jelentései 38
- Figyelmeztetések és biztonsági óvintézkedések 39
- Magyar 39
- Magyar 40
- Technikai adatok 40
- Magyar 41
- Működtetési eljárások 41
- Összeszerelési eljárások 41
- Magyar 42
- Karbantartás 43
- Magyar 43
- Magyar 44
- Magyar 45
- Co je co 46
- Překlad původních pokynů 46
- Význam symbolů 46
- Čeština 46
- Varování a bezpečnostní pokyny 47
- Čeština 47
- Montážní postupy 48
- Specifikace 48
- Čeština 48
- Obsluha 49
- Čeština 49
- Čeština 50
- Údržba 51
- Čeština 51
- Čeština 52
- Asıl talimatların çevirisi 53
- Sembollerin anlamlari 53
- Tanimlar 53
- Türkçe 53
- Türkçe 54
- Uyarilar ve güvenli k tali matlari 54
- Spesi fi kasyonlar 55
- Türkçe 55
- Montaj i şlemleri 56
- Türkçe 56
- Çaliştirma 56
- Türkçe 57
- Türkçe 58
- Türkçe 59
- Türkçe 60
- Ce şi ce este 61
- Română 61
- Semnificaţia simbolurilor 61
- Traducerea instrucţiunilor originale 61
- Avertismente şi instrucţiuni de siguranţă 62
- Română 62
- Română 63
- Specificatii 63
- Proceduri de asamblare 64
- Proceduri de operare 64
- Română 64
- Română 65
- Română 66
- Mentenanţă 67
- Română 67
- Română 68
- Opis sestavnih delov 69
- Pomen simbolov 69
- Prevod originalnih navodil 69
- Slovenščina 69
- Opozorila in varnostna navodila 70
- Slovenščina 70
- Postopek montaže 71
- Slovenščina 71
- Specifikacije 71
- Postopek upravljanja 72
- Slovenščina 72
- Slovenščina 73
- Slovenščina 74
- Vzdrževanje 74
- Slovenščina 75
- Значение символов или табличек 76
- Перевод оригинальных инструкций 76
- Русский 76
- Что это такое 76
- Предостережения и инструкции по технике безопасности 77
- Русский 77
- Русский 78
- Русский 79
- Сборочные операции 79
- Спецификации 79
- Рабочие операции 80
- Русский 80
- Русский 81
- Русский 82
- Техобслуживание 82
- Русский 83
- Русский 84
- Book_cs40ea_ee indb 91 000book_cs40ea_ee indb 91 2010 09 03 14 50 41 2010 09 03 14 50 41 91
- Clonshaugh business technology park dublin 17 lreland 91
- Deklaracja zgodności z eci 91
- Deutsch 91
- Ec declaration of conformity 91
- Ek megfelelőségi nyilatkozat 91
- English 91
- Erklärung zur konformität mit ce regeln 91
- F tashimo vice president director 91
- Head offi ce in japan 91
- Hitachi koki co ltd 91
- Hitachi koki europe ltd 91
- Hitachi power tools europe gmbh 91
- Magyar 91
- Polski 91
- Prohlášení o shodě s ec 91
- Representative offi ce in europe 91
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 91
- Siemensring 34 47877 willich 1 f r germany 91
- Technical fi le at 91
- Čeština 91
- Εκ δηλωση εναρμ νισμ υ 91
- Ελληνικά 91
- Ab uygunluk beyani 92
- Book_cs40ea_ee indb 92 000book_cs40ea_ee indb 92 2010 09 03 14 50 41 2010 09 03 14 50 41 92
- Clonshaugh business technology park dublin 17 lreland 92
- Code no e99006391 g printed in china 92
- Declaraţie de conformitate ce 92
- Ec deklaracija o skladnosti 92
- F tashimo vice president director 92
- Head offi ce in japan 92
- Hitachi koki co ltd 92
- Hitachi koki europe ltd 92
- Hitachi power tools europe gmbh 92
- Pyсский 92
- Representative offi ce in europe 92
- Română 92
- Sadece avrupa ülkeleri için geçerlidir orman hizmeti için portatif elektrikli testere cs40ea 92
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 92
- Siemensring 34 47877 willich 1 f r germany 92
- Slovenščina 92
- Technical fi le at 92
- Türkçe 92
- Valabil numai pentru europa fierăstrău portabil cu lanţ pentru servicii forestiere cs40ea 92
- Velja le za evropo prenosna verižna žaga za gozdno službo cs40ea 92
- Декларация соответствия ес 92
- Только для европы портативная цепная пила для лесных работ cs40ea 92
Похожие устройства
- Hitachi CS40YNS Инструкция по эксплуатации
- Hitachi CS40ELNA Инструкция по эксплуатации
- Fiskars ерный/оранжевый 115360 Инструкция по эксплуатации
- Husqvarna LC 551SP 9673432-01 Инструкция по эксплуатации
- Калибр НПЦ-250/15НК Инструкция по эксплуатации
- RedVerg RD-GC62-20 6615725 Инструкция по эксплуатации
- RedVerg RD5461C-120A 5019112 Инструкция по эксплуатации
- RedVerg RD4380C-100A 5019111 Инструкция по эксплуатации
- RedVerg RD5461C-130A 5019113 Инструкция по эксплуатации
- Patriot pT 4355 IMPERIAL 250108105 Инструкция по эксплуатации
- Интерскол АМ-110/2000В 239.1.0.00 Инструкция по эксплуатации
- Patriot ES 2216 220301520 Инструкция по эксплуатации
- Patriot PT 47LS 512109014 Инструкция по эксплуатации
- Patriot sE 30 732304621 Инструкция по эксплуатации
- Patriot КАЛУГА 440107560 Инструкция по эксплуатации
- Patriot PТ 4520 220105560 Инструкция по эксплуатации
- Patriot F 300 315302417 Инструкция по монтажу и эксплуатации
- Patriot PS 710 E426108475 Инструкция по эксплуатации
- Patriot PT 2512 220104500 Инструкция по эксплуатации
- Makita BUB143Z Инструкция по эксплуатации