D-Link DGS-1210-28XS/ME [252/519] Enable erps

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

234

Command Parameter

config erps instance <value 1-16> mel <value 0-7>

config erps instance <value 1-16> protected_vlan [add | delete] vlanid <vidlist>

config erps instance

<value 1-16> timer [holdoff_time <integer 0-1000> | guard_time <integer 10-

2000> | wtr_time <integer 1-12>]

config erps instance <value 1-16> revertive [enable | disable]

show erps instance <value 1-16> {sub_ring_instance}

erps clear instance <value 1-16>

erps force switch

instance

<value 1-16> ring_port [west | east]

erps manual switch

instance

<value 1-16> ring_port [west | east]

config erps version [g.8032v1 | g.8032v2]

Each command is listed in detail, as follows:

enable erps

Purpose Used to enable the

global ERPS function on a switch. When both

the global state and the specified ring ERPS state are enabled, the

specified ring will be activated.

Syntax

enable erps

Description

The enable erps is used to enable the ERPS function on a switch.

STP and LBD should be disabled on the ring ports before enabling

ERPS. ERPS cannot be enabled before the R-APS VLAN is created,

and ring ports, and RPL port, and RPL owner, are configured. Note

that these parameters cannot be changed when ERPS is enabled. In

order to guarantee correct operation, the following integrity will be

chedked when ERPS is enabled.

Parameters None.

Restrictions Only Administrator, operator and power user-level users can issue

this command.

Example usage:

To enable ERPS:

DGS-1210-28MP/ME:5# enable erps

Command: enable erps

Success.

DGS-1210-28MP/ME:5#