D-Link DGS-1210-28XS/ME [312/519] Basic ip commands

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

294

BASIC IP COMMANDS

The Basic IP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)

in the following table.

Command

Parameter

create ipif <ipif_name 12> <network_address> <vlan_name 32> state [enable | disable]

delete ipif [<ipif_name 12> | all]

enable ipif [<ipif_name 12> | all]

disable ipif [<ipif_name 12> | all]

config ipif

<ipif_name 12> { ( [ipaddress <network_address>] [vlan <vlan_name 32>] [state

{enable | disable}] ) | dhcp | ipv6 {ipv6address <ipv6networkaddr> | state {enable

| disable}} | ipv4 state {enable | disable} | dhcp_option12 { hostname <hostname

63> | clear_hostname | state {enable | disable} } | dhcpv6_client {enable |

disable} }

show ipif

Each command is listed in detail, as follows:

create ipif

Purpose To create an IP interface on the switch.

Syntax

create ipif <ipif_name 12> <network_address> <vlan_name 32>

state [enable | disable]

Description

The create ipif command will create an IP interface.

Parameters

<ipif_name 12> - Specifies the IP interface name to be created.

<network_address> - IP address and netmask of the IP interface to

be created.

<vlan_name 32> -

The name of the VLAN that will be associated

with the above IP interfact.

state [enable | disable] –

Specifies to enable or disable the IP

interface.

Restrictions Only Administrator or operator-level users can issue this command.

Example usage:

To create an IP interface:

DGS-1210-28MP/ME:5# create ipif ip2 10.1.2.3/255.0.0.0 default state enable

Command: create ipif ip2 10.1.2.3/255.0.0.0 default state enable

Success.

DGS-1210-28MP/ME:5#