D-Link DGS-1210-28XS/ME [429/519] Config duld recover_timer

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

411

To enable unidirectional link detection on port 1:

DGS-1210-28MP/ME:5# config duld ports 1 state enable

Command: config duld ports 1 state enable

Success.

DGS-1210-28MP/ME:5#

show duld ports

Purpose To show unidirectional link detection information.

Syntax

show duld ports {<portlist> | all}

Description

This show duld ports command is used to show unidirectional link

detection information.

Parameters

[<portlist> | all] – Specifies a port, a range of ports or all ports to be

displayed.

Restrictions None.

Example usage:

To show unidirectional link detection information of port 1:

DGS-1210-28MP/ME:5# show duld ports 1

Command: show duld ports 1

port Admin State Oper Status Mode Link Status Discovery Time(Sec)

------ ------------------- ----------------- -------- ----------------- -------------------

1 Enabled Disabled Normal Unknown 10

DGS-1210-28MP/ME:5#

config duld recover_timer

Purpose To configure unidirectional link detection recover time.

Syntax

config duld recover_timer [0 | <sec 60-1000000>]

Description

The config duld recover_timer command is used to configure

unidirectional link detection recover time.

Parameters

[0 | <sec 60-1000000>] – Specifies the recover time of unidirectional

link detection function.

Restrictions Only Administrator and operator-level users can issue this

command.

Example usage: