D-Link DGS-1210-28XS/ME [489/519] Config lldp ports

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

471

Purpose To define LLDP management basic TLVs advertisement on a port or

ports.

Syntax

config lldp ports [<portlist>|all] basic_tlvs [all |

{port_description | system_name | system_description |

system_capabilities}] [enable | disable]

Description

The config lldp ports basic TLVs command defines if lldp will

advertise the switch’s basic TLVs the command is per port on the

switch.

Parameters

[<portlist> | all] – Specify a port or ports to be configured.

Basic TLVs:

all – Advertisement of all the basic TLVs

port description – Advertisement of dort description

system name – Advertisement of system name

system description – Advertisement of system description

system capabilities – Advertisement of system capabilities

Restrictions None.

Example usage:

To configure LLDP Basis TLVs

DGS-1210-28MP/ME:5# config lldp ports 1 basic_tlvs all enable

Command: config lldp ports 1 basic_tlvs all enable

Success.

DGS-1210-28MP/ME:5#

config lldp ports

Purpose To define LLDP management basic TLVs advertisement on a port or ports.

Syntax

config lldp ports [<portlist>|all] dot3_tlvs [all | link aggregation |

mac_phy_configuration_status | maximum_frame_size |

power_via_mdi] [enable | disable]

Description

The config lldp ports dot3 TLVs command defines if lldp will advertise the

mac_phy_configuration_status the command is per port on the switch.

Parameters

[<portlist> | all] – Specify a port or ports to be configured.

dot3_tlvs – defines if the advertisement is enabled or disabled. The possible

values are: link_aggregation, mac_phy_configuration_status,

maximum_frame_size, power_via_mdi or all.

Restrictions Only Administrator or operator-level users can issue this command.

Example usage:

To configure LLDP mac_phy_configuration status: