D-Link DGS-1210-28XS/ME [55/519] Command parameter

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

SMTP SERVER COMMANDS

The SMTP Server commands in the Command Line Interface (CLI) are listed (along with the appropriate

parameters) in the following table.

Command

Parameter

enable smtp

disable smtp

config smtp

[self_mail_addr <mail_addr 64> | server [<ipaddr> | <ipv6addr>] | server_port

<tcp_port_number 1-65535>] [{add mail_receiver <mail_addr 64>| delete

mail_receiver <index 1-8>}]

show smtp

smtp sent_testmsg

Each command is listed in detail, as follows:

enable smtp

Purpose To enable the SMTP server feature on the Switch.

Syntax

enable smtp

Description

The enable smtp

command enables the SMTP server feature on

the Switch.

Parameters None.

Restrictions Only Administrator and Operator-level users can issue this

command.

Example usage:

To enable SMTP feature on the Switch:

DGS-1210-28MP/ME:5# enable smtp

Command: enable smtp

Success.

DGS-1210-28MP/ME:5#

disable smtp

Purpose To disable the SMTP server feature on the Switch.

Syntax

disable smtp

Description

The disable smtp command disables the SMTP server feature on

the Switch.

Parameters None.

Restrictions Only Administrator and Operator-

level users can issue this

command.